templates

  1. Enabling SRTP and SIPS

    I am hoping to find a better solution than custom templates. T54W and T53W. it appears you have to not only turn on SRTP mode in users/options. but also have to write a custom template to enable TLS transport and enforce SRTP. Is there an easier way to flip 100+ phones to start using SRTP...
    • Flipper
    • Thread
    • sip/tls srtp templates
    • Replies: 1
    • Forum: Yealink
  2. ArneDery

    Use of chat templates

    Hi, Will the use of chat templates be possible from within the Windows softphone app? Currently we already have the chat option, hower it would be very usefull to be able to apply chat templates. I'm not looking to configure the templates, this can be done via the PWA, however using them would...
    • ArneDery
    • Thread
    • chat templates windows app
    • Replies: 2
    • Forum: Windows

  3. Feature request: Fanvil X6U provision template options

    A few things I've seen that would be a nice quality of life improvement for configuring from inside 3cx for the Fanvil X6U phones: - BLF does not have the "Memory Key" option. This is accessible from the actual phone UI, and is a little different from a Speed Dial key. I use this for direct...

  4. Multicast Paging predicament (lots of info, sorry)

    We have recently been told by management to enable full building emergency paging abilities in our 3CX system. We have our primary campus with roughly 150 phones (Locan LAN - in office) and 3 satellite cities with roughly 10-30 phones each (local SBC) that we need to implement this on. First...

  5. Ringtone Problems in Default Snom 3CX Template

    Hi 3CX, I've just been through my first deployment of Snom phones with 3CX, specifically the D717. These are very good quality phones, but the default 3CX Snom template needs improvement. Most specifically, the ringtone fields. They don't actually work for setting the ringtone of external...

  6. Contact lookup wouldn't repeat if 10 minutes not passes

    I have my own integration template, that is configured to make contact lookup always (not "when contact is not found"). I've found out that if the same number calls more frequently, than once a 10 min - the lookup doesn't starts. The best solution for me is to start lookup even if contact calls...
    • YuriiITE
    • Thread
    • crm lookup templates
    • Replies: 4
    • Forum: Other
  7. prfindlay

    Unsupported Templates. Aaargh!

    Yes, I know custom templates are not supported, but can anyone help with this frustrating situation? I have a template that works, it's just not got the correct name to be picked up by my phones I'm using a modified SNOM template and have just changed <deviceconfig...
    • prfindlay
    • Thread
    • custom templates templates
    • Replies: 4
    • Forum: Other

  8. Fanvil Template - LLDP default's to false??

    Why does the default Fanvil template disable LLDP? Is this an oversight by the team managing the templates? Makes provisioning Fanvil phones in some environments a total nightmare, its set to true in templates for all other brands. LLDP by default is enabled in all Fanvil base firmware...
    • Shellite
    • Thread
    • custom templates fanvil templates
    • Replies: 3
    • Forum: Fanvil

  9. Unsupported Gigaset DX800A Provisioning Template Created

    Hi All. The PBX is working fine and the mobile app works great too - SIP trunk yet to be provisoned. I've been asked by the powers that be to provision these Gigaset DX800A handsets. Before we even get to the fact that these models are 'unsupported', I've followed the steps outlined in the...
    • ayazaali
    • Thread
    • gigaset models phones provision templates
    • Replies: 3
    • Forum: Other

  10. Conference Templates

    I'm playing around with 3CX and I noticed that the email templates for conferences don't work as expected when using Office 365. It seems like line breaks don't carry over into the description of the event. Has anyone else noticed this and if so, is there a way to make it do line breaks properly...

  11. Fanvil H5 Template Change Request

    How do we go about submitting a change request on the official templates? I have made changes and using a custom template, but I would prefer to use the official template so that I can resume with automatic updates when they arrive. But for our hotel, I can't because of the below issue. For...

  12. External distingtive ring update from portal

    In the 3cx portal you can select on Grandstream Configure Default Ring Configure Queue Ringtone Most calls seem to really Trigger the "external" Ringtone Can a drop down be added to control the "External" <P1489>2</P1489> <-------- Value There are a bunch of other post with references to...
    • Samfiller
    • Thread
    • grandsteam templates
    • Replies: 0
    • Forum: Server

  13. Change phones' codec priority through templates

    Hello, We are using latest 15.5 SP6 for our 3cx and latest provisioning templates for our Polycom VVX 4xx,6xx and Yealinks T2xP (version 80502). We have been trying to change the priority of the G.711a-law codec on the phones, so that it is used first in the SDP. Our target is to change the...
    • George Ts
    • Thread
    • codec codec priority polycom priority t26p t28p templates vvx yealink
    • Replies: 21
    • Forum: Phone System / PBX

  14. Solved Customisation of emailed voicemail template

    Hi all, I am testing out the latest version of the Standard edition of 3CX (free version), on windows server. I would like to be able to customise the email template that is used when a voicemail is sent to an email address as an attachment. I need also to customise the subject line, to...

  15. Solved Provisioning Custom Template on Yealink Phone

    Hello, How can I get some of the phones to load a custom template we have? Whenever we attempt to add new Yealink phones, and select the custom template we have created, it continues to load the default and won't pull the custom one we have created. Shown in the screenshot, are a few of the...
  16. Paul Omans

    Save "Email Templates" Tab in "Email Settings" Until Confirmation

    When I make changes in the "Email Templates" tab in the "Email Settings" section, any changes are not saved if I switch to a different tab in Email Settings. The only way to save settings in the Email Templates tab is to immediately press "OK" and save ALL settings that I have made in the Email...
    • Paul Omans
    • Thread
    • email email settings email template mail server notifications settings templates
    • Replies: 0
    • Forum: Server
  17. Evolute IT

    SIP Trunk - Changelog

    Hey guys at 3CX, I would like to know if there is a changelog of trunk providers templates? I see that VoiceMeUp (Canada) is updated frequently but only the IP Based template, not the Register one. Is there a way to know what's changed? I also want to know if it is better using IP based or...
  18. Evolute IT

    Grandstream Phones - More settings

    Hi, As all of you know, Grandstream phones are back in business and seemed to be working great. However, looking through the configuration template, I see a lot of potential settings that should be there also. Here's the list: Weather settings : city, degrees (C or F) Wallpaper choice...
    • Evolute IT
    • Thread
    • grandstream phone provisioning templates
    • Replies: 16
    • Forum: Server

  19. Solved Default Provisioning Templates

    Can I get the default Provisioning Templates anywhere from 3cx? The reason for this is 3cx is supporting the Snom D785 now, but I cannot provision the phone. I already updated the phone to the latest firmware, 3cx is running Version 15.5.0. It is my guess that I cannot provision due to the...
  20. Michael Menor

    Location of Email Templates

    I want to edit the email templates to possibly remove the last section that says "Learn how to get more out of 3CX at www.3cx.com" Does anyone know where to edit them?
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom