yealink provision

  1. Setup two yealink T57W on same ext

    Hello, I tried searching for this one in previous post but couldnt seem to find anything. Im looking to setup 2 same model Yealink phones on the same ext, this person happens to have an office in two departments so splits time between offices. These are both local phones, same network at the on...
  2. Solved Yealink - Cannot Download Remote Phonebook

    We have a customer that moved over to 3CX last week and since Friday, no one can access the company phonebook. They could up until Friday. I've tried factory resetting the handset and provisioning it again but no luck.
  3. Solved Yealink T46G Shared Park BLF provisioning bug

    This may apply to other T4XG models, however, we've found that under the most current 3CX supported firmware (28.83.0.130) you can manually provision the phone to have a working Shared Park DSSKey. However, if you try and configure this in the webclient BLF tab and reboot the phone the button...
  4. Ability to set SIP Transport Protocol for IP Phone Provisioning (Yealink etc.)

    Hi, Can 3CX please add the ability set the SIP Transport Protocol when provisioning IP Phones such as Yealink? I've had a few instances where we have had to use TCP or TLS rather than UDP provisioning to get handsets working, typically because an upstream carrier network is blocking or...
  5. Yealink T48S Phones perfectly working, but 3cx-state not changing to "PROVISIONED"

    Hello, we have several Yealink T48S Phones. They're all perfectly working. They are pulling their configuration from PBX, they are all registered, line works. BUT: 3cx-state shown at "Phones" not changing to "PROVISIONED". 3CX Windows Clients are shown as "PROVISIONED", but not the phones. Why?