3CX v15.5 Linux & Digium TDM800p - it works???

[ANJOTI]

Hi,

I found an old post here about Windows version and some saying about this card was made for linux... We need use FXO PCI card to our new server (project for next 03 weeks).

>>> Is there someone using that card on current Linux version?

Old post:
https://www.3cx.com/community/threads/8-fxo-fxs-pci-express-card-tdm800-trixbox-voip-ip-pbx.5312/

 

[jimbo59]

That card is not supported. The post says the card was working in Windows but NOT in 3CX.

 

[ANJOTI]

Hi jimbo59, do you have real experience with that model?

* That post is so old...

 

[jimbo59]

No. I simply read the post.
It is not supported in 3CX and there are plenty of cheap ways to get FXO working without an internal card.

 

[eddv123]

If you are desperate to use an internal card as opposed to a stand-alone gateway and have not purchased yet, beroNet do a PCI card which should work fine: https://www.3cx.com/voip-gateways/

https://www.beronet.com/products/beronet-pcie-voip-cards/

 

[ANJOTI]

Hi eddv123,

the question is 'not desperate' but some card available here in Brazil to use on a traditional PC as SIPserver running 3CX Linux. I found another post where Nick Galea says to be so hard to put Digium cards (designed for Asterisk) to work...

Probably we go forward with Grandstream Gateway due to TELCO's offer here using Analog lines (RJ-11).

Usefull link:
https://pbxinaflash.com/community/threads/3cx-and-analog-hardware-integration.20692/

 

[eddv123]

Grandstreams are a good option - and are very cost effective.
I did also hear rumors that some may even be certified officially at some point in the future.

 

[ANJOTI]

I dont think so since they have their appliance as SIPserver... but, lets wait.