Broadvoice - Has anyone gotten outbound calls working on it?

Status
Not open for further replies.

dvs4man

Joined
Oct 5, 2009
Messages
50
Reaction score
0
I have Broadvoice with my A580IP Siemens phone. All works well for incoming calls, but outgoing calls I get the 403 Forbidden error from the sip.broadvoice.com. I have ports 69-30000 open through my router, and I do have GREEN for the Trunks status. It is only calling out that I have this issue.

I do see though that my STUN Server I am using ALWAYS times out. Not sure if that is part and parcel of the problem. I had left it set to the stu2 3cx STUN server, and tried others though, with the same results, always timing out.

The logs, I have uploaded into another message, but I will cut/paste below.

Any help is appreciated. Please feel free to PM me or reply back here.

Thanks.

21:20:04.201 [CM503008]: Call(6): Call is terminated
21:19:59.145 Session 4619 of leg C:6.1 is confirmed
21:19:59.059 [CM503007]: Call(6): Device joined: sip:[email protected]:40600;rinstance=a2b37f4c796f0b1b
21:19:59.052 [CM503007]: Call(6): Device joined: sip:[email protected]:5060
21:19:59.048 [MS210005] C:6.1:Answer provided. Connection(proxy mode):192.168.0.168:7018(7019)
21:19:59.045 [MS210001] C:6.2:Answer received. RTP connection[unsecure]: 127.0.0.1:40618(40619)
21:19:59.042 Remote SDP is set for legC:6.2
21:19:59.032 [CM503002]: Call(6): Alerting sip:[email protected]:40600;rinstance=a2b37f4c796f0b1b
21:19:58.894 [CM503025]: Call(6): Calling Unknown:Ext.EndCall@[Dev:sip:[email protected]:40600;rinstance=a2b37f4c796f0b1b]
21:19:58.891 [MS210004] C:6.2:Offer provided. Connection(proxy mode): 127.0.0.1:7020(7021)
21:19:58.844 [CM503016]: Call(6): Attempt to reach <sip:[email protected]> failed. Reason: Not Found
21:19:58.843 [CM503014]: Call(6): No known route to target: <sip:[email protected]>
21:19:58.834 [CM503010]: Making route(s) to <sip:[email protected]>
21:19:58.833 [MS210000] C:6.1:Offer received. RTP connection: 192.168.0.199:5016(5017)
21:19:58.832 Remote SDP is set for legC:6.1
21:19:58.831 [CM505001]: Ext.10: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Aastra MBU/01.30 (MAC=00087B0753C8; HW=7)] PBX contact: [sip:[email protected]:5060]
21:19:58.820 [CM503001]: Call(6): Incoming call from Ext.10 to <sip:[email protected]>
21:19:58.813 [CM500002]: Info on incoming INVITE:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.0.198;branch=z9hG4bKci51geef7;received=192.168.0.199
Max-Forwards: 70
Contact: <sip:[email protected]>
21:19:32.875 [CM504004]: Registration succeeded for: 10001@broadvoice
21:19:32.346 [CM504003]: Sent registration request for 10001@broadvoice
 
I have setup a 'callcentric' provider test, and they work flawlessly.
Curious what is different with Broadvoice?

If anyone can help, it is much appreciated, since Broadvoice is the only one who can port our phone number. All the other supported providers cannot.

Below is a copy of the log of callcentric successful calls, and even the STUN server failing issues.

Thanks.

06:35:13.242 [CM503008]: Call(4): Call is terminated
06:34:48.707 [CM503007]: Call(4): Device joined: sip:{mycallcentricnumber}@callcentric.com:5060
06:34:48.683 [CM503007]: Call(4): Device joined: sip:[email protected]:5060
06:34:33.648 [CM505003]: Provider:[callcentric] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [] PBX contact: [sip:{mycallcentricnumber}@71.193.85.142:5060]
06:34:33.647 [CM503002]: Call(4): Alerting sip:{mycallcentricnumber}@callcentric.com:5060
06:34:31.569 [CM503025]: Call(4): Calling VoIPline:{callingtothatnumber}@(Ln.10001@callcentric)@[Dev:sip:{mycallcentricnumber}@callcentric.com:5060]
06:34:31.411 [CM503004]: Call(4): Route 1: VoIPline:{callingtothatnumber}@(Ln.10001@callcentric)@[Dev:sip:{mycallcentricnumber}@callcentric.com:5060]
06:34:31.408 [CM503010]: Making route(s) to <sip:{callingtothatnumber}@192.168.0.198;user=phone>
06:34:31.406 [CM505001]: Ext.10: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [A580 IP022140000000] PBX contact: [sip:[email protected]:5060]
06:34:31.393 [CM503001]: Call(4): Incoming call from Ext.10 to <sip:{callingtothatnumber}@192.168.0.198;user=phone>
06:34:17.162 [CM503003]: Call(3): Call to sip:{callingtothatnumber}@66.193.176.35 has failed; Cause: 487 Request Terminated; from IP:204.11.192.38:5060
06:34:16.995 [CM503008]: Call(3): Call is terminated
06:34:16.070 [CM505003]: Provider:[callcentric] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [] PBX contact: [sip:{mycallcentricnumber}@71.193.85.142:5060]
06:34:16.070 [CM503002]: Call(3): Alerting sip:{mycallcentricnumber}@callcentric.com:5060
06:34:12.364 [CM503025]: Call(3): Calling VoIPline:{callingtothatnumber}@(Ln.10001@callcentric)@[Dev:sip:{mycallcentricnumber}@callcentric.com:5060]
06:34:12.139 [CM503004]: Call(3): Route 1: VoIPline:{callingtothatnumber}@(Ln.10001@callcentric)@[Dev:sip:{mycallcentricnumber}@callcentric.com:5060]
06:34:12.136 [CM503010]: Making route(s) to <sip:{callingtothatnumber}@192.168.0.198;user=phone>
06:34:12.131 [CM505001]: Ext.10: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [A580 IP022140000000] PBX contact: [sip:[email protected]:5060]
06:34:12.115 [CM503001]: Call(3): Incoming call from Ext.10 to <sip:{callingtothatnumber}@192.168.0.198;user=phone>
06:33:20.792 [CM503003]: Call(2): Call to sip:{callingtothatnumber}@66.193.176.35 has failed; Cause: 487 Request Terminated; from IP:204.11.192.38:5060
06:33:20.625 [CM503008]: Call(2): Call is terminated
06:33:13.776 [CM505003]: Provider:[callcentric] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [] PBX contact: [sip:{mycallcentricnumber}@71.193.85.142:5060]
06:33:13.775 [CM503002]: Call(2): Alerting sip:{mycallcentricnumber}@callcentric.com:5060
06:33:09.648 [CM503025]: Call(2): Calling VoIPline:{callingtothatnumber}@(Ln.10001@callcentric)@[Dev:sip:{mycallcentricnumber}@callcentric.com:5060]
06:33:09.382 [CM503004]: Call(2): Route 1: VoIPline:{callingtothatnumber}@(Ln.10001@callcentric)@[Dev:sip:{mycallcentricnumber}@callcentric.com:5060]
06:33:09.380 [CM503010]: Making route(s) to <sip:{callingtothatnumber}@192.168.0.198;user=phone>
06:33:09.378 [CM505001]: Ext.10: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [A580 IP022140000000] PBX contact: [sip:[email protected]:5060]
06:33:09.361 [CM503001]: Call(2): Incoming call from Ext.10 to <sip:{callingtothatnumber}@192.168.0.198;user=phone>
05:12:04.279 [CM506001]: STUN request to resolve SIP external IP:port mapping is sent to STUN server 64.69.76.21:3478 over Transport 192.168.0.198:5060
01:52:01.785 [CM506001]: STUN request to resolve SIP external IP:port mapping is sent to STUN server 64.69.76.21:3478 over Transport 192.168.0.198:5060
22:31:59.221 [CM506001]: STUN request to resolve SIP external IP:port mapping is sent to STUN server 64.69.76.21:3478 over Transport 192.168.0.198:5060
 
Broadvoice had issues on their end. I was on with a technician, and now it is working fine.
Thanks.
 
Re: Broadvoice - Has anyone gotten outbound calls working on

can you share with me what he did?

John Ma
 
Re: Broadvoice - Has anyone gotten outbound calls working on

dvs4man said:
21:19:58.844 [CM503016]: Call(6): Attempt to reach <sip:[email protected]> failed. Reason: Not Found
21:19:58.843 [CM503014]: Call(6): No known route to target: <sip:[email protected]>
21:19:58.834 [CM503010]: Making route(s) to <sip:[email protected]>

This would seem to indicate that your outbound rules don't know how to handle the digits that you are dialling.
 
Re: Broadvoice - Has anyone gotten outbound calls working on

I really need help solving the 403 forbidden error. If anyone know please post it. Many thanks.

John Ma
 
Status
Not open for further replies.

Forum statistics

Threads
111,875
Messages
589,510
Members
164,724
Latest member
StratisFear