I'm on a project that took me two months already , I really need help to continue. Here is my problem . I have a cisco ip phone 7911 which came with SCCP firmware . Not having cisco unified call manager I chose 3CX ( a demo version) for testing before buying the license. I was able to set up a SIP firmware ( 8.2.2 ) on my phone after weeks and weeks of research . Currently the firmware is installed and I have the tone on my phone . But the problem is that the phone can not s record on the 3CX server and make its extension. After research I noticed that 3CX support cisco ip phone 7940/7960 but not 7911 . I also compressed we could configure 3CX for it to support the 7911 phone .
HERE IS THE PATTERN OF 7960 THAT I FOUND IN THE 3CX . HOW CAN I CHANGE THE ORDER THAT THE 3CX SUPPORTED MY PHONE 7911 . PLEASE REPLY ME . I MUCH ON ACCOUNT YOUR HELP .
{\rtf1\ansi\ansicpg1252\cocoartf1265
{\fonttbl\f0\fswiss\fcharset0 Helvetica;}
{\colortbl;\red255\green255\blue255;}
\margl1440\margr1440\vieww16740\viewh12580\viewkind0
\pard\tx566\tx1133\tx1700\tx2267\tx2834\tx3401\tx3968\tx4535\tx5102\tx5669\tx6236\tx6803\pardirnatural
\f0\fs24 \cf0 <?xml version="1.0"?>\
<doc xmlns:tcx="http://www.3cx.com">\
<header>\
<type>phone-template</type>\
<version>33517</version>\
<time>2012-12-12 09:00:00</time>\
<name>Cisco 7940</name>\
<url>http://www.cisco.com</url>\
<models>\
<model ua="Cisco-CP7940G">Cisco 7940</model>\
<model ua="Cisco-CP7941G">Cisco 7941</model>\
<model ua="Cisco-CP7960G">Cisco 7960</model> \
<model ua="Cisco-CP7961G">Cisco 7961</model> \
</models>\
<description>Cisco SCCP SIP Phones</description>\
<parsers>\
<parser>BLF</parser>\
</parsers>\
<rebootParams>\
</rebootParams>\
<resyncParams>\
</resyncParams>\
<firmwareParams>\
</firmwareParams>\
<AllowedNetworkConfig>\
<option value="LOCALLAN">1</option>\
<option value="REMOTESTUN">0</option>\
<option value="REMOTESPM">0</option>\
</AllowedNetworkConfig>\
<dst variableName="dstEnableDisable" enable="1" disable="0">\
</dst>\
<languages>\
<!--The first entry is the selected entry in management console-->\
<option value="English">\
<item name="langwebUI">English</item>\
<item name="langlcdUI">English</item>\
</option>\
</languages>\
<timezoneParams param="time_timezone_linksys">\
<!--The first entry is the selected entry in management console--> \
<option value="GMT">GMT(London, Dublin, Edinburgh, Lisbon, Casablanca, Monrovia)</option>\
<option value="CET">GMT+1:00 (Paris,Amsterdam, Berlin, Rome, Vienna, Madrid, Warsaw, Brussels)</option>\
<option value="EET">GMT+2:00 (Israel, Cairo, Athens, Helsinki, Istanbul, Buchrest)</option>\
<option value="BT">GMT+3:00 (Moscow, Kuwait, Baghdad, Tehran, Nairobi)</option>\
<option value="IT">GMT+3:30 (Tehran)</option>\
<option value="ZP4">GMT+4:00 (Abu Dhabi, Yerevan, Baku)</option>\
<option value="AFG">GMT+4:30 (Kabul)</option>\
<option value="ZP5">GMT+5:00 (Islamabad, Ekaterinburg, Karachi, Tashkent)</option>\
<option value="IST">GMT+5:30 (Chennai, New Delhi, Mumbai)</option>\
<option value="ZP6">GMT+6:00 (Almaty, Astana. Dhaka, Novosibirsk)</option>\
<option value="SUM">GMT+6:30 (North Sumatra)</option>\
<option value="WAST">GMT+7:00 (Bankok, Jakarta, Hanoi, Krasnoyarsk)</option>\
<option value="HST">GMT+8:00 (Beijing, Singapore, Taipei, Kuala Lumpur, Irkutsk, Perth)</option>\
<option value="JST">GMT+9:00 (Japan, Korea, Yakutsk)</option>\
<option value="CAST">GMT+9:30 (Adelaide, Darwin)</option>\
<option value="EAST">GMT+10:00 (Brisbane, Sydney, Melbourne, Canberra, Guam, Hobart)</option>\
<option value="EADT">GMT+11:00 (Magadan, Solomon Is., New Caledonia)</option>\
<option value="NZST">GMT+12:00 (Auckland, Wellington, Fiji)</option>\
<option value="IDL">GMT-12:00 (International Date Line West)</option>\
<option value="NT">GMT-11:00 (Midway Island, Samoa)</option>\
<option value="AHST">GMT-10:00 (US Hawaiian Time)</option>\
<option value="IMT">GMT-9:30 (Isle Marquises)</option>\
<option value="YST">GMT-9:00 (US Alaska Time)</option>\
<option value="PST">GMT-8:00 (US Pacific Time, Los Angeles)</option>\
<option value="MST">GMT-7:00 (US Mountain Time, Denver)</option>\
<option value="CST">GMT-6:00 (US Central Time, Chicago)</option>\
<option value="EST">GMT-5:00 (US Eastern Time, New York)</option>\
<option value="AST">GMT-4:00 (Atlantic Time, Quebec)</option>\
<option value="NST">GMT-3:30 (Newfoundland)</option>\
<option value="BST">GMT-3:00 (Greenland)</option>\
<option value="AT">GMT-2:00 (Mid-Atlantic)</option>\
<option value="WAT">GMT-1:00 (Azores, Cape Verdi Is.)</option>\
</timezoneParams>\
<Codecspriorities>\
<Codecspriority variableName="codec1" PayloadTypeName="payload1" priority="1">\
<!--The first entry is the selected entry in management console. codec1 will be replaced by value, payload1 will be replaced by payload-->\
<option value="g711ulaw" payload="g711ulaw">G711U</option>\
<option value="g711alaw" payload="g711alaw">G711A</option>\
<option value="g729a" payload="g729a">G729</option>\
</Codecspriority>\
<Codecspriority variableName="codec2" PayloadTypeName="payload2" priority="2">\
<!--The first entry is the selected entry in management console-->\
<option value="8" payload="PCMA">N/A</option>\
</Codecspriority>\
<Codecspriority variableName="codec3" PayloadTypeName="payload3" priority="3">\
<!--The first entry is the selected entry in management console-->\
<option value="9" payload="G722">N/A</option>\
</Codecspriority>\
<Codecspriority variableName="codec4" PayloadTypeName="payload4" priority="4">\
<!--The first entry is the selected entry in management console-->\
<option value="18" payload="G729">N/A</option>\
</Codecspriority>\
</Codecspriorities>\
</header>\
<blftype>\
</blftype>\
<data>\
<device>\
<type>phone</type>\
<!-- Friendly Name -->\
<field name="Name">Cisco 7940 Gobal</field>\
<deviceconfig filename="SIPDefault.cnf">\
<filename>\
<model name="Cisco7940" filename="SIPDefault.cnf" />\
</filename>\
<![CDATA[\
#Fimrware Version SIP for Cisco 7940\
image_version: P0S3-8-12-00\
\
#Setting for 3CX Phone System Server\
proxy1_address: %%pbx_ip%%\
proxy_register: 1\
proxy1_port: %%param::sipport%%\
timer_register_expires: "900"\
\
# Outbound Proxy\
outbound_proxy: ""\
outbound_proxy_port: ""\
\
#Vox Number\
messages_uri: "%%vm_number%%"\
\
#DTMF Mode\
dtmf_inband: "1"\
dtmf_db_level: "3"\
\
#Dialing\
dialedNumber: "true"\
\
#Setting for Timezone and DST, Option GMT,CET,EET,BT,IT,ZP4,AFG,ZP5,IST,ZP6,SUM,WAST,HST,JST,CAST,EAST,EADT,NZST,IDL,NT,AHST,IMT,YST,PST,MST,CST,EST,AST,NST,BST,AT,WAT\
sntp_server: "%%param::time_ntp_server%%"\
sntp_mode: unicast\
time_zone: "%%param::time_timezone_linksys%%"\
dst_offset: 1\
dst_start_month: March\
dst_start_day_of_week: Sun\
dst_start_week_of_month: 8\
dst_start_time: 01\
dst_stop_month: Oct\
dst_stop_day_of_week: Sun\
dst_stop_week_of_month: 8\
dst_stop_time: 02\
dst_auto_adjust: 1\
time_format_24hr: 1\
date_format : M/D/Y\
\
# Allow Transfer to be completed while target phone is still ringing (Options: 0-Disabled, 1-Enabled)\
semi_attended_transfer: "1"\
\
]]></deviceconfig>\
</device>\
</data>\
<data>\
<device>\
<type>phone</type>\
<!-- Friendly Name -->\
<field name="Name">Cisco 7940 Device Config</field>\
<deviceconfig filename="SIP%%mac_address%%.cnf">\
<![CDATA[\
#Line 1 Setting\
line1_name: "%%extension_number%%"\
line1_authname: "%%extension_auth_id%%"\
line1_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line1_password: "%%extension_auth_pw%%"\
line1_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 2 Setting\
line2_name: "%%extension_number%%"\
line2_authname: "%%extension_auth_id%%"\
line2_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line2_password: "%%extension_auth_pw%%"\
line2_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
\{IF ua=Cisco-CP7960G\}\
#Line 3 Setting\
line3_name: "%%extension_number%%"\
line3_authname: "%%extension_auth_id%%"\
line3_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line3_password: "%%extension_auth_pw%%"\
line3_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 4 Setting\
line4_name: "%%extension_number%%"\
line4_authname: "%%extension_auth_id%%"\
line4_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line4_password: "%%extension_auth_pw%%"\
line4_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 5 Setting\
line5_name: "%%extension_number%%"\
line5_authname: "%%extension_auth_id%%"\
line5_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line5_password: "%%extension_auth_pw%%"\
line5_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 6 Setting\
line6_name: "%%extension_number%%"\
line6_authname: "%%extension_auth_id%%"\
line6_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line6_password: "%%extension_auth_pw%%"\
line6_shortname: "%%extension_first_name%% %%extension_last_name%%" \
\{ENDIF\}\
\
\{IF ua=Cisco-CP7961G\}\
#Line 3 Setting\
line3_name: "%%extension_number%%"\
line3_authname: "%%extension_auth_id%%"\
line3_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line3_password: "%%extension_auth_pw%%"\
line3_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 4 Setting\
line4_name: "%%extension_number%%"\
line4_authname: "%%extension_auth_id%%"\
line4_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line4_password: "%%extension_auth_pw%%"\
line4_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 5 Setting\
line5_name: "%%extension_number%%"\
line5_authname: "%%extension_auth_id%%"\
line5_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line5_password: "%%extension_auth_pw%%"\
line5_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 6 Setting\
line6_name: "%%extension_number%%"\
line6_authname: "%%extension_auth_id%%"\
line6_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line6_password: "%%extension_auth_pw%%"\
line6_shortname: "%%extension_first_name%% %%extension_last_name%%" \
\{ENDIF\}\
\
#Default Codec\
preferred_codec: %%codec1%%\
\
#3CX Phone System Tbook max 32 entries\
directory_url: "http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/%%PROVSUBDIR%%/cisco_phonebook.xml"\
\
#3CX Logo\
logo_url: "http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/%%PROVSUBDIR%%/logo/cisco9740.bmp"\
\
# NAT/Firewall Traversal\
nat_enable: "0"\
nat_address: ""\
voip_control_port: "5060"\
start_media_port: "16384"\
end_media_port: "32766"\
nat_received_processing: "0"\
\
# Display Name of Phone in right upper conrner\
phone_label: "ID %%extension_number%%__"\
\
# Remote Debugging via Telnet (0-Disabled, 1-Enabled, 2-Privileged)\
telnet_level: "2"\
phone_prompt: "3CXPhoneSystem"\
phone_password: "cisco"\
]]></deviceconfig>\
</device>\
</data>\
</doc>}
HERE IS THE PATTERN OF 7960 THAT I FOUND IN THE 3CX . HOW CAN I CHANGE THE ORDER THAT THE 3CX SUPPORTED MY PHONE 7911 . PLEASE REPLY ME . I MUCH ON ACCOUNT YOUR HELP .
{\rtf1\ansi\ansicpg1252\cocoartf1265
{\fonttbl\f0\fswiss\fcharset0 Helvetica;}
{\colortbl;\red255\green255\blue255;}
\margl1440\margr1440\vieww16740\viewh12580\viewkind0
\pard\tx566\tx1133\tx1700\tx2267\tx2834\tx3401\tx3968\tx4535\tx5102\tx5669\tx6236\tx6803\pardirnatural
\f0\fs24 \cf0 <?xml version="1.0"?>\
<doc xmlns:tcx="http://www.3cx.com">\
<header>\
<type>phone-template</type>\
<version>33517</version>\
<time>2012-12-12 09:00:00</time>\
<name>Cisco 7940</name>\
<url>http://www.cisco.com</url>\
<models>\
<model ua="Cisco-CP7940G">Cisco 7940</model>\
<model ua="Cisco-CP7941G">Cisco 7941</model>\
<model ua="Cisco-CP7960G">Cisco 7960</model> \
<model ua="Cisco-CP7961G">Cisco 7961</model> \
</models>\
<description>Cisco SCCP SIP Phones</description>\
<parsers>\
<parser>BLF</parser>\
</parsers>\
<rebootParams>\
</rebootParams>\
<resyncParams>\
</resyncParams>\
<firmwareParams>\
</firmwareParams>\
<AllowedNetworkConfig>\
<option value="LOCALLAN">1</option>\
<option value="REMOTESTUN">0</option>\
<option value="REMOTESPM">0</option>\
</AllowedNetworkConfig>\
<dst variableName="dstEnableDisable" enable="1" disable="0">\
</dst>\
<languages>\
<!--The first entry is the selected entry in management console-->\
<option value="English">\
<item name="langwebUI">English</item>\
<item name="langlcdUI">English</item>\
</option>\
</languages>\
<timezoneParams param="time_timezone_linksys">\
<!--The first entry is the selected entry in management console--> \
<option value="GMT">GMT(London, Dublin, Edinburgh, Lisbon, Casablanca, Monrovia)</option>\
<option value="CET">GMT+1:00 (Paris,Amsterdam, Berlin, Rome, Vienna, Madrid, Warsaw, Brussels)</option>\
<option value="EET">GMT+2:00 (Israel, Cairo, Athens, Helsinki, Istanbul, Buchrest)</option>\
<option value="BT">GMT+3:00 (Moscow, Kuwait, Baghdad, Tehran, Nairobi)</option>\
<option value="IT">GMT+3:30 (Tehran)</option>\
<option value="ZP4">GMT+4:00 (Abu Dhabi, Yerevan, Baku)</option>\
<option value="AFG">GMT+4:30 (Kabul)</option>\
<option value="ZP5">GMT+5:00 (Islamabad, Ekaterinburg, Karachi, Tashkent)</option>\
<option value="IST">GMT+5:30 (Chennai, New Delhi, Mumbai)</option>\
<option value="ZP6">GMT+6:00 (Almaty, Astana. Dhaka, Novosibirsk)</option>\
<option value="SUM">GMT+6:30 (North Sumatra)</option>\
<option value="WAST">GMT+7:00 (Bankok, Jakarta, Hanoi, Krasnoyarsk)</option>\
<option value="HST">GMT+8:00 (Beijing, Singapore, Taipei, Kuala Lumpur, Irkutsk, Perth)</option>\
<option value="JST">GMT+9:00 (Japan, Korea, Yakutsk)</option>\
<option value="CAST">GMT+9:30 (Adelaide, Darwin)</option>\
<option value="EAST">GMT+10:00 (Brisbane, Sydney, Melbourne, Canberra, Guam, Hobart)</option>\
<option value="EADT">GMT+11:00 (Magadan, Solomon Is., New Caledonia)</option>\
<option value="NZST">GMT+12:00 (Auckland, Wellington, Fiji)</option>\
<option value="IDL">GMT-12:00 (International Date Line West)</option>\
<option value="NT">GMT-11:00 (Midway Island, Samoa)</option>\
<option value="AHST">GMT-10:00 (US Hawaiian Time)</option>\
<option value="IMT">GMT-9:30 (Isle Marquises)</option>\
<option value="YST">GMT-9:00 (US Alaska Time)</option>\
<option value="PST">GMT-8:00 (US Pacific Time, Los Angeles)</option>\
<option value="MST">GMT-7:00 (US Mountain Time, Denver)</option>\
<option value="CST">GMT-6:00 (US Central Time, Chicago)</option>\
<option value="EST">GMT-5:00 (US Eastern Time, New York)</option>\
<option value="AST">GMT-4:00 (Atlantic Time, Quebec)</option>\
<option value="NST">GMT-3:30 (Newfoundland)</option>\
<option value="BST">GMT-3:00 (Greenland)</option>\
<option value="AT">GMT-2:00 (Mid-Atlantic)</option>\
<option value="WAT">GMT-1:00 (Azores, Cape Verdi Is.)</option>\
</timezoneParams>\
<Codecspriorities>\
<Codecspriority variableName="codec1" PayloadTypeName="payload1" priority="1">\
<!--The first entry is the selected entry in management console. codec1 will be replaced by value, payload1 will be replaced by payload-->\
<option value="g711ulaw" payload="g711ulaw">G711U</option>\
<option value="g711alaw" payload="g711alaw">G711A</option>\
<option value="g729a" payload="g729a">G729</option>\
</Codecspriority>\
<Codecspriority variableName="codec2" PayloadTypeName="payload2" priority="2">\
<!--The first entry is the selected entry in management console-->\
<option value="8" payload="PCMA">N/A</option>\
</Codecspriority>\
<Codecspriority variableName="codec3" PayloadTypeName="payload3" priority="3">\
<!--The first entry is the selected entry in management console-->\
<option value="9" payload="G722">N/A</option>\
</Codecspriority>\
<Codecspriority variableName="codec4" PayloadTypeName="payload4" priority="4">\
<!--The first entry is the selected entry in management console-->\
<option value="18" payload="G729">N/A</option>\
</Codecspriority>\
</Codecspriorities>\
</header>\
<blftype>\
</blftype>\
<data>\
<device>\
<type>phone</type>\
<!-- Friendly Name -->\
<field name="Name">Cisco 7940 Gobal</field>\
<deviceconfig filename="SIPDefault.cnf">\
<filename>\
<model name="Cisco7940" filename="SIPDefault.cnf" />\
</filename>\
<![CDATA[\
#Fimrware Version SIP for Cisco 7940\
image_version: P0S3-8-12-00\
\
#Setting for 3CX Phone System Server\
proxy1_address: %%pbx_ip%%\
proxy_register: 1\
proxy1_port: %%param::sipport%%\
timer_register_expires: "900"\
\
# Outbound Proxy\
outbound_proxy: ""\
outbound_proxy_port: ""\
\
#Vox Number\
messages_uri: "%%vm_number%%"\
\
#DTMF Mode\
dtmf_inband: "1"\
dtmf_db_level: "3"\
\
#Dialing\
dialedNumber: "true"\
\
#Setting for Timezone and DST, Option GMT,CET,EET,BT,IT,ZP4,AFG,ZP5,IST,ZP6,SUM,WAST,HST,JST,CAST,EAST,EADT,NZST,IDL,NT,AHST,IMT,YST,PST,MST,CST,EST,AST,NST,BST,AT,WAT\
sntp_server: "%%param::time_ntp_server%%"\
sntp_mode: unicast\
time_zone: "%%param::time_timezone_linksys%%"\
dst_offset: 1\
dst_start_month: March\
dst_start_day_of_week: Sun\
dst_start_week_of_month: 8\
dst_start_time: 01\
dst_stop_month: Oct\
dst_stop_day_of_week: Sun\
dst_stop_week_of_month: 8\
dst_stop_time: 02\
dst_auto_adjust: 1\
time_format_24hr: 1\
date_format : M/D/Y\
\
# Allow Transfer to be completed while target phone is still ringing (Options: 0-Disabled, 1-Enabled)\
semi_attended_transfer: "1"\
\
]]></deviceconfig>\
</device>\
</data>\
<data>\
<device>\
<type>phone</type>\
<!-- Friendly Name -->\
<field name="Name">Cisco 7940 Device Config</field>\
<deviceconfig filename="SIP%%mac_address%%.cnf">\
<![CDATA[\
#Line 1 Setting\
line1_name: "%%extension_number%%"\
line1_authname: "%%extension_auth_id%%"\
line1_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line1_password: "%%extension_auth_pw%%"\
line1_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 2 Setting\
line2_name: "%%extension_number%%"\
line2_authname: "%%extension_auth_id%%"\
line2_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line2_password: "%%extension_auth_pw%%"\
line2_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
\{IF ua=Cisco-CP7960G\}\
#Line 3 Setting\
line3_name: "%%extension_number%%"\
line3_authname: "%%extension_auth_id%%"\
line3_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line3_password: "%%extension_auth_pw%%"\
line3_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 4 Setting\
line4_name: "%%extension_number%%"\
line4_authname: "%%extension_auth_id%%"\
line4_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line4_password: "%%extension_auth_pw%%"\
line4_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 5 Setting\
line5_name: "%%extension_number%%"\
line5_authname: "%%extension_auth_id%%"\
line5_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line5_password: "%%extension_auth_pw%%"\
line5_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 6 Setting\
line6_name: "%%extension_number%%"\
line6_authname: "%%extension_auth_id%%"\
line6_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line6_password: "%%extension_auth_pw%%"\
line6_shortname: "%%extension_first_name%% %%extension_last_name%%" \
\{ENDIF\}\
\
\{IF ua=Cisco-CP7961G\}\
#Line 3 Setting\
line3_name: "%%extension_number%%"\
line3_authname: "%%extension_auth_id%%"\
line3_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line3_password: "%%extension_auth_pw%%"\
line3_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 4 Setting\
line4_name: "%%extension_number%%"\
line4_authname: "%%extension_auth_id%%"\
line4_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line4_password: "%%extension_auth_pw%%"\
line4_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 5 Setting\
line5_name: "%%extension_number%%"\
line5_authname: "%%extension_auth_id%%"\
line5_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line5_password: "%%extension_auth_pw%%"\
line5_shortname: "%%extension_first_name%% %%extension_last_name%%"\
\
#Line 6 Setting\
line6_name: "%%extension_number%%"\
line6_authname: "%%extension_auth_id%%"\
line6_displayname: "%%extension_first_name%% %%extension_last_name%%"\
line6_password: "%%extension_auth_pw%%"\
line6_shortname: "%%extension_first_name%% %%extension_last_name%%" \
\{ENDIF\}\
\
#Default Codec\
preferred_codec: %%codec1%%\
\
#3CX Phone System Tbook max 32 entries\
directory_url: "http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/%%PROVSUBDIR%%/cisco_phonebook.xml"\
\
#3CX Logo\
logo_url: "http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/%%PROVSUBDIR%%/logo/cisco9740.bmp"\
\
# NAT/Firewall Traversal\
nat_enable: "0"\
nat_address: ""\
voip_control_port: "5060"\
start_media_port: "16384"\
end_media_port: "32766"\
nat_received_processing: "0"\
\
# Display Name of Phone in right upper conrner\
phone_label: "ID %%extension_number%%__"\
\
# Remote Debugging via Telnet (0-Disabled, 1-Enabled, 2-Privileged)\
telnet_level: "2"\
phone_prompt: "3CXPhoneSystem"\
phone_password: "cisco"\
]]></deviceconfig>\
</device>\
</data>\
</doc>}
