DID identification for incoming calls

[etcs]

We have a customer that has two separate companies that is considering purchasing a phone system. They will have two separate DIDs relative to each company. I know you can have different ring tones for separate IVRs, but is there another way to show which DID the call is originating from to be displayed on a single phone setup to answer both companies IVR?

 

[leejor]

A name can be added to the CID. See point 3 under Configuring Inbound Rules...
https://www.3cx.com/docs/manual/inbound-did-call-routing/

 

[etcs]

Thanks for the prompt reply. That is good news.