issues with outgoing call

[oscquin]

everything was working fine with this elastix 1.6.2-33 (except for faxes, but that's another topic). it uses an HP Server 300 Gb iSCSI, Atcom 1 E1 Card (mISDN)

now when I try to place an outbound call, I get this:

-- Executing [55240001@from-internal:1] Macro("SIP/9026-00000001", "user-callerid|SKIPTTL|") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/9026-00000001", "AMPUSER=9026") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/9026-00000001", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/9026-00000001", "1|Set|REALCALLERIDNUM=9026") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/9026-00000001", "AMPUSER=9026") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/9026-00000001", "AMPUSERCIDNAME=9026") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/9026-00000001", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/9026-00000001", "AMPUSERCID=9026") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/9026-00000001", "CALLERID(all)="9026" <9026>") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/9026-00000001", "0|Set|CHANNEL(language)=") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/9026-00000001", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] NoOp("SIP/9026-00000001", "Using CallerID "9026" <9026>") in new stack
-- Executing [55240001@from-internal:2] Set("SIP/9026-00000001", "_NODEST=") in new stack
-- Executing [55240001@from-internal:3] Macro("SIP/9026-00000001", "record-enable|9026|OUT|") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/9026-00000001", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/9026-00000001", "recordingcheck|20120608-111354|1339175634.3") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20120608-111354|1339175634.3: Outbound recording enabled.
recordingcheck|20120608-111354|1339175634.3: CALLFILENAME=OUT9026-20120608-111354-1339175634.3
-- AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:999] MixMonitor("SIP/9026-00000001", "OUT9026-20120608-111354-1339175634.3.wav||") in new stack
-- Executing [s@macro-record-enable:1000] Set("SIP/9026-00000001", "CDR(userfield)=audio:OUT9026-20120608-111354-1339175634.3.wav") in new stack
== Begin MixMonitor Recording SIP/9026-00000001
-- Executing [55240001@from-internal:4] Macro("SIP/9026-00000001", "dialout-trunk|2|55240001||") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/9026-00000001", "DIAL_TRUNK=2") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/9026-00000001", "0?sub-pincheck|s|1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/9026-00000001", "0?disabletrunk|1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/9026-00000001", "DIAL_NUMBER=55240001") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/9026-00000001", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/9026-00000001", "OUTBOUND_GROUP=OUT_2") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/9026-00000001", "0?nomax") in new stack
-- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/9026-00000001", "0?chanfull") in new stack
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/9026-00000001", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/9026-00000001", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/9026-00000001", "outbound-callerid|2") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/9026-00000001", "0|SetCallerPres|") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/9026-00000001", "0|Set|REALCALLERIDNUM=9026") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/9026-00000001", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/9026-00000001", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/9026-00000001", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/9026-00000001", "TRUNKOUTCID=23299000") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/9026-00000001", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/9026-00000001", "1|Set|CALLERID(all)=23299000") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/9026-00000001", "0|Set|CALLERID(all)=") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/9026-00000001", "0|SetCallerPres|prohib_passed_screen") in new stack
-- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/9026-00000001", "0|AGI|fixlocalprefix") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/9026-00000001", "OUTNUM=55240001") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/9026-00000001", "custom=AMP") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/9026-00000001", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/9026-00000001", "dialout-trunk-predial-hook|") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/9026-00000001", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/9026-00000001", "0?bypass|1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/9026-00000001", "1?customtrunk") in new stack
-- Goto (macro-dialout-trunk,s,21)
-- Executing [s@macro-dialout-trunk:21] Set("SIP/9026-00000001", "pre_num=AMP:mISDN/1/") in new stack
-- Executing [s@macro-dialout-trunk:22] Set("SIP/9026-00000001", "the_num=OUTNUM") in new stack
-- Executing [s@macro-dialout-trunk:23] Set("SIP/9026-00000001", "post_num=") in new stack
-- Executing [s@macro-dialout-trunk:24] GotoIf("SIP/9026-00000001", "1?outnum:skipoutnum") in new stack
-- Goto (macro-dialout-trunk,s,25)
-- Executing [s@macro-dialout-trunk:25] Set("SIP/9026-00000001", "the_num=55240001") in new stack
-- Executing [s@macro-dialout-trunk:26] Dial("SIP/9026-00000001", "mISDN/1/55240001|300|") in new stack
-- Called 1/55240001
P[ 1] **** Received CAUSE:44, restarting channel 1
P[ 1] Sending Restarts on this port.
P[ 1] Restarting and cleaning channel 1
P[ 1] Restarting channel 1
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dialout-trunk:27] Goto("SIP/9026-00000001", "s-CHANUNAVAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/9026-00000001", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/9026-00000001", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 44) - failing through to other trunks") in new stack
-- Executing [55240001@from-internal:5] Macro("SIP/9026-00000001", "outisbusy|") in new stack
-- Executing [s@macro-outisbusy:1] Playback("SIP/9026-00000001", "all-circuits-busy-now|noanswer") in new stack
-- <SIP/9026-00000001> Playing 'all-circuits-busy-now' (language 'en')
-- Executing [s@macro-outisbusy:2] Playback("SIP/9026-00000001", "pls-try-call-later|noanswer") in new stack
-- <SIP/9026-00000001> Playing 'pls-try-call-later' (language 'en')



but I did not change anything from the original working configuration. If someone has some experiencie with this. I will appreciate. Regards,

 

[jgutierrez]

On newwer versions, same as yours (if using elastix 2.3) misdn support is now provided by dahdi, just go into hardware detection module, check the option for writing on chan_dahdi.conf and on your outbound route, choose g0

 

[oscquin]

jgutierrez, mine is 1.6.2-33, any ideas?

 

[oscquin]

this is my misdn-init.conf file:

#
# Configuration file for your misdn hardware
#
# Usage: /usr/sbin/misdn-init start|stop|restart|config|scan|help
#

#
# Card Settings
#
# Syntax: card=<number>,<type>[,<option>...]
#
# <number> count your cards beginning with 1
# <type> either 0x1,0x4 or 0x8 for your hfcmulti hardware,
# or the name of your card driver module.
# <option> ulaw - uLaw (instead of aLaw)
# dtmf - enable DTMF detection on all B-channels
#
# pcm_slave - set PCM bus into slave mode
# If you have a set of cards, all wired via PCM. Set
# all cards into pcm_slave mode and leave one out.
# The left card will automatically be Master.
#
# ignore_pcm_frameclock - this can be set in conjunction with
# pcm_slave. If this card has a
# PCI Bus Position before the Position
# of the Master, then this port cannot
# yet receive a frameclock, so it must
# ignore the pcm frameclock.
#
# rxclock - use clocking for pcm from ST Port
# crystalclock - use clocking for pcm from PLL (genrated on board)
# watchdog - This dual E1 Board has a Watchdog for
# transparent mode
#
#
card=1,0x1

#
# Port settings
#
# Syntax: <port_type>=<port_number>[,<port_number>...]
#
# <port_type> te_ptp - TE-Mode, PTP
# te_ptmp - TE-Mode, PTMP
# te_capi_ptp - TE-Mode (capi), PTP
# te_capi_ptmp - TE-Mode (capi), PTMP
# nt_ptp - NT-Mode, PTP
# nt_ptmp - NT-Mode, PTMP
# <port_number> port that should be considered
#
te_ptmp=1

#
# Port Options
#
# Syntax: option=<port_number>,<option>[,<option>...]
#
# <option> master_clock - use master clock for this S/T interface
# (only once per chip, only for HFC 8/4)
# optical - optical (only HFC-E1)
# los - report LOS (only HFC-E1)
# ais - report AIS (only HFC-E1)
# slip - report SLIP (only HFC-E1)
# nocrc4 - turn off crc4 mode use double frame instead
# (only HFC-E1)
#
# The master_clock option is essential for retrieving and transmitting
# faxes to avoid failures during transmission. It tells the driver to
# synchronize the Card with the given Port which should be a TE Port and
# connected to the PSTN in general.
#
#option=1,master_clock
#option=2,ais,nocrc4
#option=3,optical,los,ais,slip


#
# General Options for your hfcmulti hardware
#
# poll=<number>
#
# Only one poll value must be given for all cards.
# Give the number of samples for each fifo process.
# By default 128 is used. Decrease to reduce delay, increase to
# reduce cpu load. If unsure, don't mess with it!!!
# Valid is 32, 64, 128, 256.
#
# dsp_poll=<number>
# This is the poll option which is used by mISDN_dsp, this might
# differ from the one given by poll= for the hfc based cards, since
# they can only use multiples of 32, the dsp_poll is dependant on
# the kernel timer setting which can be found in the CPU section
# in the kernel config. Defaults are there either 100Hz, 250Hz
# or 1000Hz. If your setting is either 1000 or 250 it is compatible
# with the poll option for the hfc chips, if you have 100 it is
# different and you need here a multiple of 80.
# The default is to have no dsp_poll option, then the dsp itself
# finds out which option is the best to use by itself
#
# pcm=<number>
#
# Give the id of the PCM bus. All PCM busses with the same ID
# are expected to be connected and have equal slots.
# Only one chip of the PCM bus must be master, the others slave.
#
# debug=<number>
#
# Enable debugging (see hfc_multi.h for debug options).
#
# dsp_options=<number>
#
# set this to 2 and you'll have software bridging instead of
# hardware bridging.
#
#
# dtmfthreshold=<milliseconds>
#
# Here you can tune the sensitivity of the dtmf tone recognizer.
#
# timer=<1|0>
#
# set this to 1 if you want hfcmulti to register at ztdummy (zaptel)
# and provide a 1khz timing source for it. This makes it possible
# to have an accurate timing source for asterisk through zaptel from
# hfcmulti to make applications like Meetme and faxing between wctdm
# and hfcmulti work properly.
#
poll=128
dsp_poll=128
dsp_options=0
dtmfthreshold=100
debug=0


misdn show stacks output:
* Port 1 Type TE Prot. PTP L2Link UP L1Link:UP Blocked:0 Debug:0

this is the outbound route config:

[outrt-004-todoPermitido]
include => outrt-004-todoPermitido-custom
exten => _.,1,Macro(user-callerid,SKIPTTL,)
exten => _.,n,Set(_NODEST=)
exten => _.,n,Macro(record-enable,${AMPUSER},OUT,)
exten => _.,n,Macro(dialout-trunk,2,${EXTEN},,)
exten => _.,n,Macro(outisbusy,)