Outgoing Call using Pennytel

[topher]

Hi All,

I had Elastix 2.4.0 new installed and one account in Pennytel VoIP. All incoming call using Pennytel works fine however i always heard "all circuit are busy now please try your call later" in outgoing call.

Here is the Peer Details:
disallow=all
allow=ulaw&alaw
canredirect=no
dtmfmode=rfc2833
host=sip.pennytel.com
insecure=very
pedantic=no
qualify=yes
secret=8JXXXXXXXX
type=peer
username=88XXXXXXXX

Thanks

 

[Bob1]

I dont think that you have the trunk correctly set for Pennytel. I might be wrong, but used them many years ago.

You might find some better information here

http://www.freepbx.org/forum/freepbx/us ... p-pennytel

Regards

Bob