Hi,
we configured for our customer some 8961 ip phones with 3cx. We created the required templates and the calls are working fine.
The problem occur when someone wants to forward a call. The phone sends the following message:
REFER sip:x.x.x.x SIP/2.0
Via: SIP/2.0/UDP x.x.x.x:5060;branch=z9hG4bK38eaf9d1
From: <sip:[email protected]>;tag=84802d77c0fd0010520724f9-20198d62
To: "xxxxxxxx"<sip:xxxxxxxx@xxxxxx:5060;nf=e>
Call-ID: [email protected]
Max-Forwards: 70
Date: Fri, 01 Jan 1982 00:15:53 GMT
CSeq: 101 REFER
User-Agent: Cisco-CP8961/9.4.2
Contact: <sip:[email protected]:5060;transport=udp>
Referred-By: <sip:xxxxx@xxxxxxx>
Refer-To: cid:[email protected]
Require: norefersub
Proxy-Authorization: Digest username="xxxxxxxxxxxxxxx",realm="3CXPhoneSystem",uri="sip:x.x.x.x",response="a95853e3e5ee1986e6a14140230ff1e8",nonce="414d53596617ee4c52:4b0c678c53f75cc496fb6efe82e4ee4f",algorithm=MD5
Content-Length: 926
Content-Type: application/x-cisco-remotecc-request+xml
Content-Disposition: session;handling=required
Content-Id: <[email protected]>
And from the 3cx server i receive:
SIP/2.0 420 Bad Extension
Via: SIP/2.0/UDP x.x.x.x:5060;branch=z9hG4bK38eaf9d1
To: "xxxxx"<sip:xxxxxxxx@xxxxxxxxxxx:5060;nf=e>;tag=c80e5242
From: <sip:[email protected]>;tag=84802d77c0fd0010520724f9-20198d62
Call-ID: [email protected]
CSeq: 101 REFER
Unsupported: norefersub
Content-Length: 0
Anybody has experience with this issue?
Is there a way to make supported that option in 3cx or is there a way to "remove" that option from the REFER message?
Thanks
Alessandro
we configured for our customer some 8961 ip phones with 3cx. We created the required templates and the calls are working fine.
The problem occur when someone wants to forward a call. The phone sends the following message:
REFER sip:x.x.x.x SIP/2.0
Via: SIP/2.0/UDP x.x.x.x:5060;branch=z9hG4bK38eaf9d1
From: <sip:[email protected]>;tag=84802d77c0fd0010520724f9-20198d62
To: "xxxxxxxx"<sip:xxxxxxxx@xxxxxx:5060;nf=e>
Call-ID: [email protected]
Max-Forwards: 70
Date: Fri, 01 Jan 1982 00:15:53 GMT
CSeq: 101 REFER
User-Agent: Cisco-CP8961/9.4.2
Contact: <sip:[email protected]:5060;transport=udp>
Referred-By: <sip:xxxxx@xxxxxxx>
Refer-To: cid:[email protected]
Require: norefersub
Proxy-Authorization: Digest username="xxxxxxxxxxxxxxx",realm="3CXPhoneSystem",uri="sip:x.x.x.x",response="a95853e3e5ee1986e6a14140230ff1e8",nonce="414d53596617ee4c52:4b0c678c53f75cc496fb6efe82e4ee4f",algorithm=MD5
Content-Length: 926
Content-Type: application/x-cisco-remotecc-request+xml
Content-Disposition: session;handling=required
Content-Id: <[email protected]>
And from the 3cx server i receive:
SIP/2.0 420 Bad Extension
Via: SIP/2.0/UDP x.x.x.x:5060;branch=z9hG4bK38eaf9d1
To: "xxxxx"<sip:xxxxxxxx@xxxxxxxxxxx:5060;nf=e>;tag=c80e5242
From: <sip:[email protected]>;tag=84802d77c0fd0010520724f9-20198d62
Call-ID: [email protected]
CSeq: 101 REFER
Unsupported: norefersub
Content-Length: 0
Anybody has experience with this issue?
Is there a way to make supported that option in 3cx or is there a way to "remove" that option from the REFER message?
Thanks
Alessandro
