Security Logs for SIP SLG Parsing Error.
Here is the setup I am using.
I have a static NAT from the Public IP to my internal IP on TCP Port 5060 for SIP Registration. Then I added a rule to allow "any any" to my internal network on TCP ports 9000 - 9999 per the 3CX documentation and also on UDP port 5060. Since I am also using a Cisco 7940G SIP phone, I read that I need to open ports 16384 - 32766 so there is a rule in there for that as well. So from the outside world to my internal SIP phones ports TCP 9000 - 9999, TCP 16384 - 32766 and UDP 5060 are all open. I have no specific Static NATs to internal SIP phones which is why I think i am getting this error. Here is some output from my logs...
Sep 4 20:04:27 2006 Firewall Error Firewall internal SIP ALG: Failed parsing. Error code: -1019 [repeated 36 times, last time on Sep 4 20:05:03 2006]
Sep 4 20:03:14 2006 Firewall Error Firewall internal SIP ALG: Failed parsing. Error code: -1019 [repeated 54 times, last time on Sep 4 20:04:15 2006]
Sep 4 19:45:40 2006 Firewall Error Firewall internal SIP ALG: Failed parsing. Error code: -1019 [repeated 783 times, last time on Sep 4 20:03:02 2006]
Sep 4 19:45:29 2006 Firewall Setup Firewall internal Firewall configuration succeeded
Sep 4 19:45:28 2006 Firewall Setup Firewall internal Starting firewall configuration
Sep 4 19:45:28 2006 Firewall Error Firewall internal SIP ALG: Failed parsing. Error code: -1019 [repeated 18 times, last time on Sep 4 19:45:28 2006]
Sep 4 19:45:28 2006 Firewall Setup Firewall internal Firewall configuration succeeded
Sep 4 19:45:27 2006 Firewall Setup Firewall internal Starting firewall configuration
Sep 4 19:43:40 2006 Firewall Error Firewall internal SIP ALG: Failed parsing. Error code: -1019 [repeated 72 times, last time on Sep 4 19:45:04 2006]
Sep 4 19:34:09 2006 Firewall Error Firewall internal SIP ALG: Failed parsing. Error code: -1019 [repeated 423 times, last time on Sep 4 19:43:27 2006]