Wahsega PA System.

[SFRAZ1]

Hello, I am stuck and need help with setting up a PA system. Wahseha Confirmed that their PA system works with 3cx. I am unsure what information they are asking for considering we are using hosted 3cx. We also have a SBC for IP phones. The Wahsega Software has the option to use the Stun server but not sure if we need to use it for this. Please look at the screenshot.

 

[Alejandro_3CX]

Hi @SFRAZ1 unfortunately the device mentioned is not supported, it means that has not been tested, there is not provisioning template and we don't know what are the limitations, if they mention it works with 3CX you will need to enter in contact with them so they can assist you with the configuration.

From the extension you can get the whole registration details



Have a great weekend!

 

[SFRAZ1]

Do you get this info by logging in to the extension on the web client?

 

[SFRAZ1]

Hi @SFRAZ1 unfortunately the device mentioned is not supported, it means that has not been tested, there is not provisioning template and we don't know what are the limitations, if they mention it works with 3CX you will need to enter in contact with them so they can assist you with the configuration.

From the extension you can get the whole registration details

View attachment 36656

Have a great weekend!

Thank you for the reply. Where do I find this page?

 

[Alejandro_3CX]

Thank you for the reply. Where do I find this page?

You may check this document

 

[SFRAZ1]

Thank you so much that document helped and I had the system working.