firmware

  1. Grandstream HT802 Freezes... 4/15/2019 firmware fixes bug

    My Grandstream telephone adapter was giving me problems with freezing. I just upgraded my firmware, and in the release notes for FIRMWARE VERSION 1.0.11.6 dated 4/15/2019 it lists the following bug fix: • Fixed device freeze after few hours. So, if your device is freezing, try updating...

  2. After latest update Fanvil X5S periodically flashes Upgrade Finished!

    Running 16.0.910 X5S Firmware 1.12.2 Fanvil Template version - 89557 - Not Custom I have deleted the phone from the extension, factory reset the phone, then added back to the extension. Problem persists. I just saw an extra empty entry in the BLF fields that shouldn't have been there, so I...

  3. Phone firmware versions mismatch between software and site

    Specifically looking at the Yealink T23G Currently running 3CX Professional Perpetual 15.5.15502.6 The system says my phones are current on FW version 44.83.0.55 Yet the 3CX firmware page https://www.3cx.com/support/phone-firmwares/ shows 44.84.0.35 is the "latest distributed required...

  4. Snom D375 FW update

    Hi all, does anybody know if when or when the firmware for the Snom D375 will be raised to the new release 10? Unfortunately the Bluetooth stack in release 8.9.3.96 nearly unusable for pairing with a headset. Regards
  5. Alan H

    Can't Firmware update with SBC

    With the new v16 update, all of our Yealink's are behind on their firmware. I can't update the software without removing SBC and changing it to Stun just to get the firmware to download and run. Any ideas on how to fix this to where I'm not touching 40 + phone?
  6. Andriy

    Fanvil phones x3s and x5 2.10 firmware bug

    Dear Team and Members I have found a bug in Fanvil x3s and x5 firmware. I have a few problems with transferred calls. Unattended transfers work just fine. but on Attended transfer, after the transfer is completed, the final destination (call receiver) can not hear the original caller. I have...

  7. firmware

    Why is my 3cx showing this: Yealink SIP-T48G Not Supported 35.83.0.55 this is the same i can download from https://www.3cx.com/support/phone-firmwares/ if i try to get it and upload to phone, is shows error, from the phone.

  8. firmware for wifi

    hi, I'm trying to install on the Intel Nuc, but during setup, I see a message that some of my hardware needs firmware files to operate. It's about the wifi which I need to finish the installation (otherwise I receive 'failed to retrieve the preconfiguration file'..) I've put the required files...

  9. Fanvil X4 screen says "Handset is not onhook" with OK and EXIT soft button options again

    this thread was locked: https://www.3cx.com/community/threads/fanvil-x4-screen-says-handset-is-not-onhook-with-ok-and-exit-soft-button-options.62209/#post-261104 so i'm just opening another since i have another phone that's doing the same thing. i logged on the ui to take a look at the screen...

  10. Grandstream GXP1760 Firmware 1.0.0.23 update

    Hi, I just bought a bunch of gxp1760 phones. Most were fine but 2 so far came with firmware version 1.0.0.23. This version doesn't have the manual firmware update options that are typically in the web interface. I've tried everything I can think of to update them, grandstream firmware http...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom