firmware

  1. Wake On Lan from 3CX firmware to 3CX SBC

    Since Fanvil use BusyBox as their embedded OS (Not sure about Yealink). It should be possible to make a 3CX firmware that periodically sends WoL packets via the ether-wake command to the SBCs MAC address (Should it not get a registration response from its IP address) to start up the SBC...
    • tcg-david
    • Thread
    • 3cx sbc firmware sbc down session border controller
    • Replies: 0
    • Forum: Other

  2. Fanvil w610w firmware downgrade

    Hi everyone! I made the mistake of upgrading a Fanvil W610W phone to firmware version 2.14.0.31.5 and I would like to downgrade it to 2.14.0.19. I tried updating through the 3CX website, but the phone just reboots. I also tried updating manually via the phone’s IP, but it says “failed.” The...
    • autsmash12
    • Thread
    • downgrade firmware provision
    • Replies: 1
    • Forum: Fanvil

  3. Fanvil W611W with strange firmware and audio issue

    Hi all, we've got a customer who has a Fanvil W611W which is running a firmware version that looks wrong to me, and that I can find no reference to anywhere online including the 3CX supported handset firmware repository and the Fanvil firmware download page on their own website. The handset was...
  4. ArneDery

    SNOM D810 support

    Hi, Currently, there is no supported firmware available for the SNOM D810. Do you have any information on when support for this model might be introduced? Thanks in advance for any advice
    • ArneDery
    • Thread
    • firmware snom
    • Replies: 5
    • Forum: Snom
  5. lancerichards

    Yealink T7x Out of Box Experience

    Hi All We are using the new Yealink T73U devices and have found the firmware which arrives on them needs to be manually updated. Has anyone come up with a streamlined way so that each handset doesn't need to be touched? Best Lance

  6. T56A Phones Screen Flashes Constently After Upgrade

    One of our Techs deployed 15 x Yealink T56A with Firmware 58.15.0.20 to Firmware 58.86.0.160. The Phone Launches and Functions but the screen Just Flashes Consistently when in idle. Ive Tried the 3CX Firmware and received an Generic Error of Failed, Ive Reached out to Yealink for a Recovery...

  7. Fanvil firmware 2.4.19 changelog

    I'm having a hard time finding the changelog for the Fanvil 2.4.19 firmware, we have X210 and X6U. The latest I can find is 2.4.13: https://fanvil.com/upload/files/20230704/17366802hn.pdf Can anyone help me out?
  8. KMorley

    Yealink SIP-T58W phone firmware downgrade before upgrade for 3CX V20

    I just received a bunch of new Yealink SIP-T58W Pro phones for a new customer installation. When attempting to install these on a V20 hosted system, the phones received their configurations, but would not register with 3CX. The result was a "No Service" indication on the phones and the phones...
    • KMorley
    • Thread
    • 150.86.0.39 150.87.0.15 downgrade firmware sip-t58w upgrade yealink
    • Replies: 4
    • Forum: Yealink

  9. Fanvil H3 Firmware Upgrade Fails through 3CX

    Good Morning All, Got large amount (~100) Fanvil H3's running through 3CX V20 on an SBC. Everything is working as expected except there is a firmware upgrade shown on the dashboard. 2.14.0.7386 - 2.14.0.7387. Pressing upgrade through 3CX seems to reboot the phone but not do anything else...
    • P4ul
    • Thread
    • fanvil firmware firmware upgrade issue
    • Replies: 3
    • Forum: Fanvil

  10. Downgrade Grandstream GDS3705 firmware?

    Hi there! I'm running into an issue of speakerphone volume being very quiet that we have confirmed is caused by a couple of Grandstream GDS3705 devices being on firmware 1.0.3.11 from the factory, and 3CX only supports up to 1.0.1.6. We've already confirmed that the issue we're having is being...
    • MUpton603
    • Thread
    • downgrade firmware gds3705 grandstream gds3705
    • Replies: 3
    • Forum: Other

  11. Block remote non-tunnel connections - firmware update fail

    Upgraded to V20. Then tried to update the firmware on Fanvil V65 phones. Found the IP address of the phones on the IP blacklist. Permitted the IP address. Still having problems updating phones. Finally, I noticed "Reason: Block WAN requests is ON". Should "Block remote non-tunnel connections" be...
    • bdpbxer
    • Thread
    • fanvil v65 firmware
    • Replies: 2
    • Forum: Fanvil

  12. X6U-V2 BLF Sub Screen Not updating.

    (BUG) We have had several reports of the SUB screen not updating on FW Version 2.12.16.20 (X6U-V2 hardware). This main issue it will display Pager one items but will dial pager 2 items. or If I have joe user in the top slot (BLF - 6) the user in top slot Pager 2 (BLF-13) sometime is dialed.
    • ORComm
    • Thread
    • blf fanvil firmware x6u
    • Replies: 6
    • Forum: Fanvil

  13. Fanvil V64 FW 2.12.16.20 WIFI is not working

    Hello, Only supported Fanvil V64 FW is 2.12.16.20, which is not even listen on Favil support site. With this firmware, Wifi adapter is not working, there is not even MAC address visible in web interface. When I downgrade FW to 2.12.16.17 which is not officially supported, it works just fine.

  14. problem when returning fanvil version X6U (downgrade)

    Tenho a versão v2.0 (2.12.16.20), mas quero voltar para a versão V1.0 (2.4.12). Ao tentar retornar a versão, uma mensagem aparece no telefone: "Arquivo inválido!". Como posso reverter a versão?
    • lucas_souza
    • Thread
    • fanvil fanvil x6u firmware help phone
    • Replies: 1
    • Forum: Fanvil

  15. Router Phone T53W 96.86.0.76

    Can someone confirm if the new 96.86.0.76 firmware is compatible as a SBC/Router phone? When I updated the SBC failed to register and I had to rollback the firmware to get the phone system working again. So now 3cx says the older 96.86.0.74 firmware is unsupported.
    • adv-seb
    • Thread
    • firmware router phone sbc firmware
    • Replies: 26
    • Forum: Yealink

  16. Yealink T40G Firmware

    Hi, Can't see any firmware for the Yealink T40G. Is this phone still supported? It's for an on premise installation running 18.0 (Build 418). Have factory reset but don't see the phone appearing in the Phones section.
  17. Orbitel_Marcus

    3CX PBX Deploying Unsupported Firmware

    Hi All, We had a client call up saying DND wasn't working on their Yealink T54W handset. When pressing the dedicated DND button, the phone would display that it's in DND, but the PBX wouldn't receive this update, and the same if we set the ext as DND on the PBX - the phone wouldn't update. We...

  18. Yealink different firmware versions

    Hi, I noted some strange differences between (Yealink) firmware versions proposed for the same T54W-modell on different (self-hosted) 3CX-systems: - On one system, based in the UK, we get offered v96.86.0.74 - On another, based in Switzerland, v96.86.100.5 :mad: - the official 3CX listing states...
    • Dominique_CH
    • Thread
    • bad firmware firmware firmware upgrade
    • Replies: 2
    • Forum: Yealink

  19. How often does 3CX update its firmware compatibility list?

    Hi everyone I just noticed something interesting today as I was setting up a Yealink T41S. It has the latest Firmware according to Yealink Support which is 66.86.0.15 https://support.yealink.com/en/portal/docList?archiveType=software&productCode=bde86188b379a63a I've done some tests and this...
    • NSlats
    • Thread
    • firmware firmware update ip phone yealink phone
    • Replies: 2
    • Forum: Yealink

  20. Solved Grandstream GXP-2160 firmware issue

    I am having issues with a Grandstream GXP-2160 IP phone, I can register the phone with config details and the phone receives voice calls without issue, however, I cannot make any calls from it to any extensions. I suspect this may be a firmware issue as I can see: "Not Supported 1.0.11.64" in...
    • Cel Push
    • Thread
    • firmware grandstream
    • Replies: 6
    • Forum: Other
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom