provisioning phones

  1. Provision Issues - Yealink

    Can I get some help. We are trying to provision our Yealink phones to 3CX and have followed the instructions and videos that are out there, but it is still not working. We did manage to change a phone to have the 3CX background and have some of the information, but it still has no service and...
  2. ronenba

    Solved V20 Provisioning address

    I upgraded to V20 now when I go to the phone cannot find the Provisioning address please help ( all phones are down)
  3. Craig Catlow

    Yealink CA Certificates

    Hi, we are having problems with a secure site where periodically our Yealink phones fail to auto provision. It looks like a CA problem. We can get the phones to provision if we disable 'accept trusted certificates' in the phones themselves. This is on a version 18 3CX hosted system. Can we...

  4. Help! Fanvil x64 no ring back

    Morning friends looking for some help.i have a small , Enterprise licensef for a small church. 12 seats, 4 web client base. I’m able to get the Fanvil X64’s to povision without problem. What I’m seeing is when I call extension to extension, I get no ringback in the target handset nor the...
    • pgedgett
    • Thread
    • fanviil x64 provisioning phones
    • Replies: 1
    • Forum: Fanvil

  5. X5U-V2 Disable Screensaver via template

    Has anyone managed to disable the screensaver on these phones via the provisioning template? My user base does not like the screensaver (personally I don't either). Fanvil has an item in their XML config file for it. I have tried adding it to my custom template and it does not seem to push...

  6. Solved Unable to add new phones (web UI OK button does nothing).

    I'm attempting to add a new phone but found the "OK button on the form with the model selection + mac address entry seemingly does nothing. The mac address has been sanitized here. Image is only for illustration of where I am having the issue. After looking in further, I noticed the "save" api...

  7. Solved Replacement of a extension on a registered dect phone (W59R) using W90DM/W90B antenna provisionned by 3CX

    Hello Everyone, We have actually some 0XXX extensions used with multi-cell dect phones and we would like to replace them by 9XXX extensions. My question is : if we change on FXS/DECT 3CX Web admin interface for exemple the extension 0360 by the extension 9360 and then force a provisonnig on the...
    • LTDP
    • Thread
    • dect extension provisioning phones replacement w90 yealink
    • Replies: 3
    • Forum: Yealink
  8. ronenba

    Provisioning Remote IP Phones

    can you Provisioning Remote IP Phones from several PBX I set up Fanvil X7A manually with the extension of each PBX, but wondering if I can from each PBX Provisioning the same phone with an extension from each PBX or if I must do it manually?

  9. Fanvil X5U Provisioning Issue with RPS - Username Numeric Values NA

    I have a Fanvil X5U setup for provisioning via RPS. When the phone boots up and prompts for the provisioning username (extension) and password (VM Pin), I cant use numeric values for the username entry. I noted when I go to the password entry I can tab through to numeric and alpha-numeric...
  10. wars

    Poly VVX PnP Provisioning with linux SBC - not displaying on PBX

    Hey all, This is first post as I've had nothing but success with our 3CX instance since setting it up 6 months ago. I love it! So. We use a mixture of Poly(com) VVX handsets, mostly 410/411/501/600. Everything we need works. BLF/Transfer/Web calling/Phonebook/Provisioning (previously including...
    • wars
    • Thread
    • pnp poly polycom provisioning phones vvx
    • Replies: 7
    • Forum: Other

  11. SNOM & STUN Provisioning

    Good Morning Everyone, We are migrating our estate to 3CX from another platform, the issue I'm having is remote provisioning of the handsets. we have 360+ Handsets across 30+ customers as you are all aware we don't like to rely on end-users to carry out any simple takes we would like to...
    • stevesamuals
    • Thread
    • d725 provisioning phones stun remote
    • Replies: 6
    • Forum: Snom

  12. DHCP Options

    Hi guys we will implement 3cx system with a fanvil ,snom and yelink Ip Phones and i have a question related to IP Phone dhcp , the ip phones will be connected through L3/2 cisco switches .. should i use IP Option 132 or 66 or 150 " Like cisco " in the DHCP pool configuration in the cisco core...

  13. Solved How Does 3CX Parse Dial Plans in XML?

    Trying to modify the default dial plan for a Grandstream phone, although I don't think the model matters and I believe I would run into this issue regardless of the phone model. The XML looks something like below. 3CX doesn't seem to recognize that everything between <P12345> and </P12345> is...
    • jmdomini
    • Thread
    • dial plan provisioning phones xml format
    • Replies: 1
    • Forum: Other
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom