spa504g

  1. Cisco SPA504G Registration Failed Error 480 After V16 to V18 Upgrade

    Two years ago, I used the info at https://www.3cx.com/sip-phones/cisco-spa/ to successfully provision a SPA504G phone using a custom template. Subsequently this phone has worked consistently with 3CX version 16. However, after upgrading to V18, registration failed for each of the phone's four...
  2. Solved Ring Group issue on Cisco SPA504G phone FW 7.6.1

    Good Day Everyone, I am new to the forum. My setup is on Azure using version Professional Annual 15.5.15502.6. We have VPN between the office network with Azure 3CX VM. The issue I am having now is Ring Group. I have a Ring Group with 4 extension using SPA504G with "All Rinig". The problem is...
  3. jcockle2

    Cisco 504G isn't seeing firmware past 7.5.2 - Can't upgrade to 7.6.1

    I've got 20 or so Cisco 504G phones running on 3CX v15 Pro. When I try to perform a firmware upgrade through the main console there does not appear to be a newer version, despite 7.6.1 being fully supported and readily available according to other threads I've been reading. I've tried using the...
  4. 3cx and Cysco SPA504g

    Hello to all. I have configured a system with 3cx installed on Windows 7 Pro x64 and four Cysco SPA504G. All phones works great, but i have a serious problem on provisioning them. When i copy url of provisioning in web interface of phone, on reboot phone does not work and when i try to access...
  5. ideas for remaining 3 line/blf buttons? Cisco SPA504G

    Yes im a newbie just playing with a new 3CX instance. I have 1 SIP Trunk with 3 DID's going to 5 Cisco SPA504G handsets. 3CX phone provisioning assigns the extension to all 4 line/blf buttons. I will keep the 1st button as is the extension, but what are some suggestions for the remaining 3...