vvx

  1. wars

    Poly VVX PnP Provisioning with linux SBC - not displaying on PBX

    Hey all, This is first post as I've had nothing but success with our 3CX instance since setting it up 6 months ago. I love it! So. We use a mixture of Poly(com) VVX handsets, mostly 410/411/501/600. Everything we need works. BLF/Transfer/Web calling/Phonebook/Provisioning (previously including...
    • wars
    • Thread
    • pnp poly polycom provisioning phones vvx
    • Replies: 7
    • Forum: Other

  2. Polycom VVX 400 (SoftKey Enablement)

    Howdy everyone, I am attempting to enable a soft key to the conference line (7000) on a Polycom VVX 400. When adding to a template I cant seem to get it working, uploading the configuration directly to the phone works. Does anyone have ideas on how I can achieve this? Verfied through the phone...

  3. Change phones' codec priority through templates

    Hello, We are using latest 15.5 SP6 for our 3cx and latest provisioning templates for our Polycom VVX 4xx,6xx and Yealinks T2xP (version 80502). We have been trying to change the priority of the G.711a-law codec on the phones, so that it is used first in the SDP. Our target is to change the...
    • George Ts
    • Thread
    • codec codec priority polycom priority t26p t28p templates vvx yealink
    • Replies: 21
    • Forum: Phone System / PBX

  4. Solved 3cx DST parameters different than the ones on Polycoms

    Hello, We are running the latest version of 3cx 15.5.15502.6. Our Polycoms VVX 4xx / 6xx are provisioned with the latest templates (version 80502). 3cx has the following parameters: TIME_DST_START_DAY=11 TIME_DST_END_DAY=4 The Polycom VVX template has the following parameters...

  5. Polycom IP phones support roadmap

    Hello 3cx team, As per the following link, Polycom IP Phones support is marked as "Legacy", i.e. limited feature set and support. https://www.3cx.com/sip-phones/ We may be considering purchasing some more Polycoms VVX 601. Are they about to be out of support? In such case, we might need to...

  6. Polycom VVX 600 dials *30 and instantly restarts (2)

    This is a follow-up on the thread below, because I need one more clarification, please: https://www.3cx.com/community/threads/polycom-vvx-600-dials-30-and-instantly-restarts.57318/ Now, the link below mentions some limitations regarding the interop of Polycom devices and 3cx...

  7. 3cx responds with HTTP 403 to Polycom VVX400

    Hello, My setup includes: 3cx 15.5.6354 on Windows server and Polycom VVX 400 IP Phones My VVX 400 was initially provisioned correctly using extension number 222. I then deleted ext. 222 on 3cx server and created a new one: ext. 333. Also attached the new ext. 333 to the same Polycom Device...

  8. Solved Polycom VVX 300 Won't Join to Server

    Hello All, I am new to 3CX, I am looking into using it as a replacement to our hosted VoIP we currently have. Some basic information on the setup is below, if further information is needed let me know. 3cx server: Debian VM Phone: Polycom VVX 300 running UC Software version 5.7.1.2205...

  9. PolyCom VVX - Mapping The BLF to attendant.resourceList.X

    Hello all, When Provisioning a Polycom 400vvx with a side car, I was attempting to only show the two lines on the main phone, and populate the Sidecar with the lines i wanted leaving attendant.resouceList.(3 - 9) => BLANK, and then add BLF's starting with position 10 and so on. The trouble is...

  10. Problem with Polycom VVX 'Accept Multiple Calls'

    I too am having a problem with VVX 300 and VVX 400 phones. They are provisioning fine after factory reset. However the behavior when a second phone call come in to a a phone with an existing conversation in progress, the caller get immediately thrown to the voicemail. Have I tried checking the...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom