yealink dect phones

  1. kiwipython

    Yealink Phones delayed ring when on different subnet

    Hello, I think this is more a network problem than 3CX but someone may have seen the problem and can help. We have a Yealink W70B DECT base and phone connected to the PBX but they are on different subnets. The phone can make calls OK but when it is called from another extension it takes 30...
    • kiwipython
    • Thread
    • delayed ring different subnet yealink dect phones
    • Replies: 1
    • Forum: Yealink

  2. Solved Yealink W70B with DECT CP935W-Base Hangs up

    Hello, Running into an issue with the W70B with a CP935W-Base via DECT...running through an onsite SBC (Debian v18). When I make a call from OR to the CP935W-Base when I pickup the call on another external/internal/3CX mobile app...you get a quick busy signal and it hangs up. The Conference...
    • sneffets
    • Thread
    • cp935w w70b yealink dect phones
    • Replies: 3
    • Forum: Yealink

  3. T53 Firmware 96.86.100.5 DND sync with 3CX issue

    Have latest self-hosted 3cx v18.5.build418 , but also installed new yealink firmware update for phones 96.86.100.5 Prior to update the DND button on phone ,when pressed ( phone shows DND symbol ), would reflect Do Not Disturb DND on under 3cx management console User->ext xxx->status Also if...
    • gygo3122
    • Thread
    • yealink 96.86.100.5 yealink dect phones
    • Replies: 1
    • Forum: Yealink

  4. W60/70b custom auto provisioning configuration

    Hi All, I've got a new system going live that is going to be used across 100+ sites within the next year. Each site will have at least x1 Yealink W60/W70b + handsets. To make life easier for the sites, rather than having them reboot the base units each time any changes are made to the base...
    • ElliotCoveney
    • Thread
    • auto provisioning w60b w70b yealink yealink dect phones
    • Replies: 2
    • Forum: Yealink

  5. Solved YeaLink and WTI Failover

    I have a remote YeaLink W60B at a site with a WTI internet failover (locations internet is not stable). Every time the ISP has an issue and the WTI flips over to cellular, the W60B goes offline from the cloud-hosted 3CX. If I reboot the WTI, then W60B registers. Likewise, when the ISP does...
    • DCB
    • Thread
    • cellular backup yealink dect phones
    • Replies: 3
    • Forum: Yealink

  6. Yealink W60B+W53H no audio

    I have a Yealink W60B+W53H set up over STUN. PBX is cloud hosted. this was working perfectly untill today, when the phone no longer gives audio (both callers can't hear each other). I have checked and tried the following: + PBX Delivers Audio is active + SIP/RTP Ports are setup correctly +...

  7. Solved Problem mit Yealink W60B & W56H Telefonen und 3CX

    Hallo liebes Forum, ich bin auf ein kurioses Problem gestoßen. Bei einem unserer Kunden klingeln vereinzelt die DECT Telefone nicht. Wir haben 8 DECT Telefone und 1x "Zentrale" als Yealink T57W. Alle Telefone und die Basis haben die neuste Firmware und sind bereits mehrmals neu gestartet...
    • sergeygruzdov
    • Thread
    • 3cx 16 yealink dect phones yealink phone issue
    • Replies: 9
    • Forum: Yealink

  8. webclient and yealink dect phones

    For a year I have had a client using the Yealink Deck phones, W56 with the webclient. The phone worked great in cti mode and the web client. With service pack 6, that ability has gone away. I now have to explain to my clients that the webclient doesn't work for them anymore. I have to set up...
    • cgm
    • Thread
    • webclient yealink dect phones
    • Replies: 2
    • Forum: Server
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom