3CX Phones system SIP Port change

selva

Silver Partner
Joined
Oct 12, 2022
Messages
11
Reaction score
1
Dear Team,

Customer has 3CX V20 Update 10 with running configuration on 3CX Debian. And they want to change the SIP Default port(TCP/UDP) 5060 to custom port like 5066.(TCP/UDP) Currently I have full backup of 3cx phone system.
How do we change the 3CX SIP Port to 5066? Kindly share the procedure for the same and also share recommended SIP ports for 3CX Ports to avoid any internal 3cx ports conflicts.

Thanks.
 
Hi @selva, note that the PBX ports are set during the setup wizard, after the pbx is installed these ports can not be changed. If you already have a backup file, then proceed by deleting the current machine and deploy a new one. Then when uploading the backup you can set up the PBX ports to the desired one.

In this document you may see the list of the external ports used

Have a good day!
 
  • Like
Reactions: Evolute IT
Hi @selva, note that the PBX ports are set during the setup wizard, after the pbx is installed these ports can not be changed. If you already have a backup file, then proceed by deleting the current machine and deploy a new one. Then when uploading the backup you can set up the PBX ports to the desired one.

In this document you may see the list of the external ports used

Have a good day!
Thanks for the details.

Without reinstalling the Debian OS , Can we rerun the wizard and restore the full backup and modify the SIP Ports?
 
Without reinstalling the Debian OS , Can we rerun the wizard and restore the full backup and modify the SIP Ports?
I recommend spinning up a new machine using the latest ISO. During the setup wizard, you can upload the backup file and configure the new ports. The whole process shouldn't take long.
 

Latest Posts

Forum statistics

Threads
112,559
Messages
593,293
Members
165,770
Latest member
LVCC_Admin