3cx pro & 2fa

[blondie63]

I have a local installation with 3CX PRO and a very strange thing happens to me, I did the reset password of my supervisor account
I changed the password via the link that arrived via email
He asks me to enable the 2fa
I tried to scan the QR generated by 3cx both Google and Microsoft Authenticator but 3CX, today, never accepts the generated code !!

 

[AndreasPo_3CX]

The first thing I would check would be the time on the phone you are using for the authenticator.
Make sure that the phone is set to automatic time if its not.
Also you could try another phone in order to rule out the phone being the issue.

 

[blondie63]

I fixed ! the problem was datetime not sync !
But honestly I thought that the Debian 3cx distribution had the NTP service active by default.

 

[blondie63]

The first thing I would check would be the time on the phone you are using for the authenticator.
Make sure that the phone is set to automatic time if its not.
Also you could try another phone in order to rule out the phone being the issue.

The problem is not the Phone, i'm using iPhone 16 pro max with latest iOS that it's always synched !