PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"
VERSION_CODENAME=bookworm
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"
UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.
Nov 16 11:52:10 <CustomerName> kernel: #2
Nov 16 11:52:10 <CustomerName> kernel: #3
Nov 16 11:52:10 <CustomerName> kernel: acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
Nov 16 11:52:10 <CustomerName> kernel: sd 0:0:0:0: Power-on or device reset occurred
Nov 16 11:52:10 <CustomerName> kernel: device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
Nov 16 11:52:10 <CustomerName> systemd-journald[255]: File /var/log/journal/aa044f6fd8b1442a804cec0f40ccc085/system.journal corrupted or uncleanly shut down, renaming and replacing.
Nov 16 11:52:10 f kernel: cirrus 0000:00:02.0: [drm] drm_plane_enable_fb_damage_clips() not called
The following packages have been unpacked but not yet configured.
They must be configured using dpkg --configure or the configure
menu option in dselect for them to work:
3cxpbx 3CX PBX
The following packages are only half configured, probably due to problems
configuring them the first time. The configuration should be retried using
dpkg --configure <package> or the configure menu option in dselect:
grub-pc GRand Unified Bootloader, version 2 (PC/BIOS version)
The following packages have been triggered, but the trigger processing
has not yet been done. Trigger processing can be requested using
dselect or dpkg --configure --pending (or dpkg --triggers-only):
postgresql-common PostgreSQL database-cluster manager
If you're unsure which drive is designated as boot drive by your BIOS, it is
often a good idea to install GRUB to all of them.
Note: it is possible to install GRUB to partition boot records as well, and some
appropriate partitions are offered here. However, this forces GRUB to use the
blocklist mechanism, which makes it less reliable, and therefore is not
recommended.
1. /dev/sda (80530 MB; QEMU_HARDDISK) 2. - /dev/sda1 (79505 MB; /)
(Enter the items or ranges you want to select, separated by spaces.)
GRUB install devices:
Use of uninitialized value $_[1] in join or string at /usr/share/perl5/Debconf/DbDriver/Stack.pm line 111.
grub-pc: Running grub-install ...
You chose not to install GRUB to any devices. If you continue, the boot loader
may not be properly configured, and when this computer next starts up it will
use whatever was previously in the boot sector. If there is an earlier version
of GRUB 2 in the boot sector, it may be unable to load modules or handle the
current configuration file.
If you are already using a different boot loader and want to carry on doing so,
or if this is a special environment where you do not need a boot loader, then
you should continue anyway. Otherwise, you should install GRUB somewhere.
Continue without installing GRUB? [yes/no]
Use of uninitialized value $_[1] in join or string at /usr/share/perl5/Debconf/DbDriver/Stack.pm line 111.
The GRUB boot loader was previously installed to a disk that is no longer
present, or whose unique identifier has changed for some reason. It is important
to make sure that the installed GRUB core image stays in sync with GRUB modules
and grub.cfg. Please check again to make sure that GRUB is written to the
appropriate boot devices.
If you're unsure which drive is designated as boot drive by your BIOS, it is
often a good idea to install GRUB to all of them.
Note: it is possible to install GRUB to partition boot records as well, and some
appropriate partitions are offered here. However, this forces GRUB to use the
blocklist mechanism, which makes it less reliable, and therefore is not
recommended.
1. /dev/sda (80530 MB; QEMU_HARDDISK) 2. - /dev/sda1 (79505 MB; /)
(Enter the items or ranges you want to select, separated by spaces.)
GRUB install devices:
Use of uninitialized value $_[1] in join or string at /usr/share/perl5/Debconf/DbDriver/Stack.pm line 111.
grub-pc: Running grub-install ...
You chose not to install GRUB to any devices. If you continue, the boot loader
may not be properly configured, and when this computer next starts up it will
use whatever was previously in the boot sector. If there is an earlier version
of GRUB 2 in the boot sector, it may be unable to load modules or handle the
current configuration file.
If you are already using a different boot loader and want to carry on doing so,
or if this is a special environment where you do not need a boot loader, then
you should continue anyway. Otherwise, you should install GRUB somewhere.
Continue without installing GRUB? [yes/no]
Use of uninitialized value $_[1] in join or string at /usr/share/perl5/Debconf/DbDriver/Stack.pm line 111.