3CX with Google Voice via Obi200 Settings

[Josh237]

I might have to start over but this is what I get.

12/19/2019 2:40:12 PM - Call to T:Line:10000>>14xxxxxxxx@[Dev:sip:[email protected]:5061] from L:36.1[Extn:807] failed, cause: Cause: 408 Request Timeout/INVITE from local

12/19/2019 2:40:12 PM - [CM503003]: Call(C:36): Call to <sip:[email protected]:5060> has failed; Cause: 408 Request Timeout/INVITE from local

 

[Josh237]

ok think I'm making progress getting this now

12/19/2019 2:43:49 PM - Call to T:Line:10000>>14xxxxxxxx@[Dev:sip:[email protected]:5061] from L:38.1[Extn:807] failed, cause: Cause: 486 Busy Here/INVITE from 192.168.1.100:5061

12/19/2019 2:43:49 PM - [CM503003]: Call(C:38): Call to <sip:[email protected]:5061> has failed; Cause: 486 Busy Here/INVITE from 192.168.1.100:5061

 

[leejor]

If you look in the Obi call log, do you see a call attempt? Can you confirm that X_InboundCallRoute is correct...your trunk number, and outer brackets are curly.

 

[Josh237]

It looks like its not even hitting the Obi I see the inbound calls hitting.
All inbound is working properly just outbound from the 3cx. I see it hit the 3cx and getting that last error I send in here.

 

[Josh237]

Sweet I looked around and found a solution that worked. I actually have to change the inbound SP2 to {>(<1:>xx.):SP1} and then all worked like a charm.

Thanks for all your help

 

[leejor]

The statement should be a catch-all dial-plan to sent any number 3CX sends, onto the correct GV port on the Obi. I'm sure that there are a number of combinations that will work. I only used, what I posted, as it was working on my Obi110 for a long time so i saw no need to change it. I had also used exactly the same settings on a second 200, with no issue.
Glad you got it working.

 

[Dominic Rizzo]

I tried that inbound and seem to be having the same issue, the calls aren't hitting the OBi

 

[leejor]

So...this is another issue, or you simply tried the configuration I used, and are reporting that it doesn't work for you?

 

[Dominic Rizzo]

I tried the configuration you used and the inbound route that Josh237 provided and nothing worked for outbound calls from 3CX. Inbound calls work like a charm.

 

[leejor]

I will have to look (tonight, or this weekend) to see what digits I have 3CX sending to the Obi

 

[Dominic Rizzo]

Never mind, got it working!

 

[leejor]

I send 1+10 digits to the Obi.

Here is a link to the DigitMap Tutorial if you haven't come across it
https://www.obitalk.com/info/documents/admin_guide/OBi-DigitMapCallRoute-Tutorial-v1-1.pdf