Allowed Country Codes not limited restricted countries.

Status
Not open for further replies.

alatteri

Customer
Joined
Aug 30, 2016
Messages
23
Reaction score
7
Fresh install of 3CX 15 on linux.

3CX is allowing outbound calls to any country even though those countries are specifically un-selected.
See the attachments. The configurations all look good to me. Never had this problem in the past with older versions.
 

Attachments

  • Screen Shot 2017-11-26 at 8.02.46 PM.png
    Screen Shot 2017-11-26 at 8.02.46 PM.png
    58.3 KB · Views: 20
  • Screen Shot 2017-11-26 at 8.02.55 PM.png
    Screen Shot 2017-11-26 at 8.02.55 PM.png
    96.9 KB · Views: 19
  • Screen Shot 2017-11-26 at 8.02.59 PM.png
    Screen Shot 2017-11-26 at 8.02.59 PM.png
    97.3 KB · Views: 17
  • Screen Shot 2017-11-26 at 8.03.02 PM.png
    Screen Shot 2017-11-26 at 8.03.02 PM.png
    97.5 KB · Views: 16
  • Screen Shot 2017-11-26 at 8.03.05 PM.png
    Screen Shot 2017-11-26 at 8.03.05 PM.png
    96.6 KB · Views: 15
  • Screen Shot 2017-11-26 at 8.04.06 PM.png
    Screen Shot 2017-11-26 at 8.04.06 PM.png
    52.6 KB · Views: 16
Hi Alatteri have you enabled E164 processing globally on the PBX?

upload_2017-11-27_12-22-29.png
 
I have. Although I do not know if "Remove if same Area Code" or National Code should be set for USA or not. I tried both, and saw no difference in behavior.
 

Attachments

  • Screen Shot 2017-11-27 at 10.47.22 AM.png
    Screen Shot 2017-11-27 at 10.47.22 AM.png
    65.1 KB · Views: 8
Last edited:
Hello alatteri,
In which format are you dialing the international numbers from the handsets?
 
I've tried both 011 and +.
 
Status
Not open for further replies.

Forum statistics

Threads
111,879
Messages
589,531
Members
164,732
Latest member
36710