Anyone using 8x8 SIP trunk

[scott]

Are you using 8x8 for their SIP trunks with 3CX and if so how is it working? I'm looking for a working configuration to test with them as they were very competitive when bidding my project. I would like help setting up the carrier profile in 3CX so I don't have to reinvent the wheel.

 

[sycotel]

ha anyone had any luck with this yet? i need config mission critical... this sucks, all i can find on my error is i guess for older versions the menus are no longer the same and i can no longer find what they are talking about please see my server log below...


21:50:49.066 [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
INVITE sip:[email protected]:5060;transport=udp;user=phone SIP/2.0
Via: SIP/2.0/UDP 192.84.16.18:5060;branch=z9hG4bKaheWYiiRlmD90fb3565ef5b4d8bafe41a68d4befeed8
Max-Forwards: 62
Record-Route: <sip:[email protected]:5060;lr;id=af1b90cb77980a4ef3658dced6d8c8d8>
Contact: <sip:[email protected]:6464>
To: <sip:[email protected].;user=phone>
From: <sip:[email protected]>;tag=beP9T90sZ8wlK
Call-ID: [email protected]
CSeq: 1274226602 INVITE
Session-Expires: 2117
Supported: timer, histinfo
User-Agent: Packet8/1.2.134.2 (OutCarrierAccess) eSLEE/0.13.98.1
Content-Length: 0
Remote-Party-ID: <sip:[email protected]>;party=calling;privacy=off;screen=yes