Assistance Required – Call Queue Routing Issue in 3CX

lasindu.n

Bronze Partner
Joined
Oct 30, 2024
Messages
8
Reaction score
3
Hi everyone,

We are looking for assistance with an IVR call routing issue in 3CX.

Customer requirement:

When a caller contacts the main number and reaches the IVR, they should be able to press 0 to speak with a staff member. Once 0 is selected, the call should be routed to either of the two designated extensions.

Current behaviour:

At the moment, when the caller presses 0, the call is being redirected to a mobile number instead of the designated extensions.

During our investigation, we found that both extensions are listed under the configured call queue. However, they are visible in the Receptionist panel but not appearing in the Queue panel.

Could anyone advise what configuration we should check to ensure that pressing 0 routes the call to either of the two extensions rather than the mobile number?

Any guidance would be appreciated.

Thank you!
 
  • Like
Reactions: Evolute IT
Hi everyone,

We are looking for assistance with an IVR call routing issue in 3CX.

Customer requirement:

When a caller contacts the main number and reaches the IVR, they should be able to press 0 to speak with a staff member. Once 0 is selected, the call should be routed to either of the two designated extensions.

Current behaviour:

At the moment, when the caller presses 0, the call is being redirected to a mobile number instead of the designated extensions.

During our investigation, we found that both extensions are listed under the configured call queue. However, they are visible in the Receptionist panel but not appearing in the Queue panel.

Could anyone advise what configuration we should check to ensure that pressing 0 routes the call to either of the two extensions rather than the mobile number?

Any guidance would be appreciated.

Thank you!
The two users are probably not logged into the queues. Right-click on them in the main Panel view (bottom list), and select Q Login > All. Also check that their status Available isn't set to "Log out of Queues" in their Forwarding Rules.

If you still can't resolve it, feel free to DM me, I can help further over a Zoom or Teams.
 

Latest Posts

Forum statistics

Threads
112,542
Messages
593,112
Members
165,751
Latest member
Teresa Nguyen