- Joined
- Sep 5, 2019
- Messages
- 57
- Reaction score
- 5
We have a client who needs a large amount of storage for call recordings. We use AWS Lightsail and decided to mount an additional drive through the AWS Interface. We were able to attach it, bring it backup up (did NOT see if we were able to access web interface) and then format the disk and mount it. We did not get any errors and rebooted one last time to confirm it would stay mounted. However upon checking, we could not access the web interface. We are able to SSH in and confirm the services are all running but we still cant access anything.
We decided to blow the system away and start again, this time once it deployed with PBXExpress, we immediately turned it off and back on, confirmed all is working. Turned off again, mounted the disk, turned it back on and same result. We can see everything there but the web interface is no longer accessible.
Any ideas what might be happening or what we are doing wrong? We need a large 256GB Disk for this install.
We decided to blow the system away and start again, this time once it deployed with PBXExpress, we immediately turned it off and back on, confirmed all is working. Turned off again, mounted the disk, turned it back on and same result. We can see everything there but the web interface is no longer accessible.
Any ideas what might be happening or what we are doing wrong? We need a large 256GB Disk for this install.
