Caller ID from a bridge connection to SIP Trunk

[saint_]

Hi all,

I have a remote PBX with no SIP trunk on it, but just a bridge connection to a Master PBX.
The Master PBX has all incoming and outgoing SIP trunk connections.

When the remote PBX tries to make a call out, its caller ID shows as UNKNOWN.
In the Master PBX, I ensured that the From: User Part is "OriginatorCallerID"
In the remote PBX, the extension has an outbound callerID number.

Any hint on how to fix this ?

Thank you.

 

[leejor]

Here is a post on the subject....

https://www.3cx.com/community/threads/outbound-caller-id-over-a-bridge.62515/

Currently, there are issues with caller ID passing over a bridge trunk.
See the reply from Yiainnis