Can not resolve target for call?

[chrisjr]

I'm using broadvoice as my voip provider and I'm able to make outbound calls but I'm not able to call into the system. Has anybody encounter this?

12:16:12.156 CallConf:nIncoming Can not resolve target for call from "Oconomowoc WI"<sip:[email protected];user=phone>;tag=dfgi to "Chris Reoch"<sip:[email protected]>
12:16:12.156 CallConf::Rejected Call (C:5) is rejected: Target is not resolved
12:16:12.140 CallConf:nIncoming Incoming call from Ln:10001@BroadVoice2 to sip:[email protected]
11:57:56.656 CallConf:nIncoming Can not resolve target for call from "Oconomowoc WI"<sip:[email protected];user=phone>;tag=jlnp to "Chris Reoch"<sip:[email protected]>
11:57:56.656 CallConf::Rejected Call (C:4) is rejected: Target is not resolved
11:57:56.656 CallConf:nIncoming Incoming call from Ln:10001@BroadVoice2 to sip:[email protected]

 

[NigelG]

RE Calls

Hi,

Are you using a softphone or voip hardphone, it sounds like a firewall issue as the local IP is not resolving to the device called. If you are running a softphone then check the firewall settings on that PC.

Regards
NigelG

 

[archie]

Please, check your inbound rule for that line. Most probably you're trying to forward the call to non-registered extension which doesn't have a destination for non-registered case.

 

[chrisjr]

Inbound calls now working but getting disconnected early.

Thanks, you where right. The inbound calls where going to an extension that does not exist. I was able to make an inbound call. When I do this the inbound call is always disconnected after 10-20 seconds. I don't know how to really read the log files that well. But it seems like Broadvoice is sending this hangup request??


15:40:23.109 StratLink:nHangUp Call(C:4): got Hang-Up from Ln:10001@BroadVoice2; reason: BYE
15:40:16.578 CallLegImpl:nConnected Established media channel for Ext.101: remote=192.168.2.10:5004; local=192.168.2.9:7014
15:40:16.578 StratInOut:nConnected Call from Ln:10001@BroadVoice2 to Ext.101 is established
15:40:10.203 ??: from 'PhoneServer:0/MediaServer'TMF detection off on EP:0000000A@
15:40:06.250 CallLegImpl:nConnected Established media channel for Ln:10001@BroadVoice2: remote=147.135.20.248:29204; local=67.53.129.195:9002
15:40:06.203 CallConf:nIncoming Incoming call from Ln:10001@BroadVoice2 to sip:[email protected]
15:39:51.531 StratLink:nHangUp Call(C:3): got Hang-Up from Ln:10001@BroadVoice2; reason: BYE
15:39:45.828 CallLegImpl:nConnected Established media channel for Ext.101: remote=192.168.2.10:5004; local=192.168.2.9:7010
15:39:45.828 StratInOut:nConnected Call from Ln:10001@BroadVoice2 to Ext.101 is established
15:39:39.937 ??: from 'PhoneServer:0/MediaServer'TMF detection off on EP:00000007@
15:39:34.781 CallLegImpl:nConnected Established media channel for Ln:10001@BroadVoice2: remote=147.135.20.250:29144; local=67.53.129.195:9000

 

[archie]

Check if VoIP provider is bound to Media Server in Advanced options for 3CX configuration. It should be bound to work correctly.

 

[chrisjr]

Outgoing Calls Disconnects

I do have it binding to the media server. I've also tried the set the device as external. But still no luck? Could it be the phone? I'm using a Grandstream budge tone 200.