Cisco 7940 SIP please help

[craftedpacket]

I have been fighting this most of the day and dont understand what I am doing wrong...The phone is upgraded to 8.6 cisco SIP code. Here are my config files.

**SIPDEFAULT**
# Image Version
image_version: P0S3-08-6-00

# Proxy Server
proxy1_address: 192.168.1.6

# Proxy Server Port (default - 5060)
proxy1_port: 5060

proxy_register: 1

timer_register_expires: 120

preferred_codec: g711alaw




****SIPMAC***
# SIP Configuration Generic File
image_version: POS3-08-6-00

# Line 1 appearance
line1_name: 100

# Line 1 Registration Authentication
line1_authname: 100

# Line 1 Registration Password
line1_password: 2600


I have a line setup in 3cx with the extension 100 and password 2600. The phone just loads...sits at configuring vlan....says loading configuration then resetting....rinse repeat.

 

[craftedpacket]

my actual file names are
SIPDefault.cnf
and
SIP000D28082631.cnf

 

[craftedpacket]

these are 7940 phones...not 7941...my TFTP server says the phone is looking for a SIPMAC.CNF.XML and a SIPMAC.CNF.TIV....???