Codec gestion like ip phone for DECT ?

[KoesioOccitanieTech]

Hello,

We are able to change codecs order on IP phone but when it comes to DECT, we don't have the choice, i'm pretty sure it was the case in V18.
I'm in Europe and PCMA is largely used here and my W90B use PCMU by default.



If we can avoid any transcoding it will be nice to have the choice of the codec order.


Can you explain me why it gets removed ?

Thank you,
Best Regards.

 

[fxbastler]

I'm in Europe and PCMA is largely used here and my W90B use PCMU by default.

full ack, always the default PCMU problem - as with the fax

Look for a 3CX parameter named MLTACC_<MAC> . This specifies the order of codecs to be used for the DECT device.
Depending on the device, this is either plain text or a number: Codec 8 is PCMA, 0 is PCMU, 9 is G722, 18 is G729, etc.

Can you explain me why it gets removed ?

no

 

[KoesioOccitanieTech]

full ack, always the default PCMU problem - as with the fax

Look for a 3CX parameter named MLTACC_<MAC> . This specifies the order of codecs to be used for the DECT device.
Depending on the device, this is either plain text or a number: Codec 8 is PCMA, 0 is PCMU, 9 is G722, 18 is G729, etc.


no

Oh nice, thank you for the fast reply.
If i change the parameter with the "MLTACC" and re-provision the DECT base, it should be good ?

 

[fxbastler]

it should be good ?

yesss