config gateway by line

[bassel]

hello guys
i use a costum gateway called perspone
i dint find any documentation online for this gateway
any way its work good when i config the gateway as trunk
what i need is change the configuration to by line to made a specific forward to each number
i need 4 trunk for my 4 pstn line

the screen shot in the attachment
i thing i have to add gateway prefix for each line
but what the config will be on 3cx
how tell 3cx this sip have this prefix



the default is trunk gateway mode and its work fine on this way



i think i have change to config by line to get 4 trunk from same gateway

 

[leejor]

If you want 4 individual trunks, then you have to create 4 trunk groups in 3CX. Each should have a unique port...5060, 5061,5062 & 5063. That needs to be reflected in both the gateway and the trunk settings in 3CX. If you had one trunk group, and each one required a prefix (as some gateways do), then you would do that in the outbound rules.

 

[YiannisH_3CX]

Hello @bassel

I would recommend using a supported gateway especially since there is no documentation for the gateway you are using and i am guessing no support.
Please find a list with supported devices in the link below
https://www.3cx.com/support/