Configuring a Nokia E 51, E65 and N95 for Remote connection (3G) to 3CX Phone System
This guide is based on the configuration needed to setup your phone when you are in the range of a specific 3G network.
Ensure that you have created the extension that you wish to use with the phone in 3CX Phone System first. Take note of the ID field and the password that you have entered for the extension.
Configure your Nokia mobile phone as per the manufacturer manual for web browsing. Once this is confirmed you may proceed to configure the Internet Telephone and SIP functions of the phone.
From your Nokia, E51, E65 and N95 go to "Tools" and then to "Settings". Click on "Connection" followed by "SIP settings".
Choose the option to add a new default profile.
In “Profile name” enter “Remote 3CX”, move down to “Service profile” and choose “IETF “. Proceed to “Default access point” and choose your 3G provider.
In the “Public user name” field enter your extension@external ip from your 3CX server (Example: [email protected])
In the “Use compression” choose “No” and under “Registration” choose “Always on”. For the “Use security” select “No”.
Access the “Proxy server” node.
In the “Proxy server address” enter the external ip from your 3CX server (example: 92.108.100.253)
In the “Realm” field enter “92.108.100.253”, move down to the “User name” field and enter your extension (example: 100), followed bye the “Password” and enter the password of
your extension.
Moving down to “Allow loose routing” choose “Yes” and in “Transport type” select “UDP“ and “Port” should be set to “ 5060”
Navigate back one step and move down to the “Registrar server”.
In the “Registrar Server” enter the external ip from your 3CX server (example: 92.108.100.253)
In the “Realm” field enter “92.108.100.253”, move down to the “User name” field and enter your extension (example: 100), followed bye the “Password” and enter the password of your extension.
In the “Transport type” choose UDP and “Port” setting to “5060”
Now go back to "Connection" and then to "Internet tel. settings"
Create a new profile and call it “Remote 3CX” and under “SIP profiles” choose the “3CX” profile.
Guide br Frederik Frydendal 8)
This guide is based on the configuration needed to setup your phone when you are in the range of a specific 3G network.
Ensure that you have created the extension that you wish to use with the phone in 3CX Phone System first. Take note of the ID field and the password that you have entered for the extension.
Configure your Nokia mobile phone as per the manufacturer manual for web browsing. Once this is confirmed you may proceed to configure the Internet Telephone and SIP functions of the phone.
From your Nokia, E51, E65 and N95 go to "Tools" and then to "Settings". Click on "Connection" followed by "SIP settings".
Choose the option to add a new default profile.
In “Profile name” enter “Remote 3CX”, move down to “Service profile” and choose “IETF “. Proceed to “Default access point” and choose your 3G provider.
In the “Public user name” field enter your extension@external ip from your 3CX server (Example: [email protected])
In the “Use compression” choose “No” and under “Registration” choose “Always on”. For the “Use security” select “No”.
Access the “Proxy server” node.
In the “Proxy server address” enter the external ip from your 3CX server (example: 92.108.100.253)
In the “Realm” field enter “92.108.100.253”, move down to the “User name” field and enter your extension (example: 100), followed bye the “Password” and enter the password of
your extension.
Moving down to “Allow loose routing” choose “Yes” and in “Transport type” select “UDP“ and “Port” should be set to “ 5060”
Navigate back one step and move down to the “Registrar server”.
In the “Registrar Server” enter the external ip from your 3CX server (example: 92.108.100.253)
In the “Realm” field enter “92.108.100.253”, move down to the “User name” field and enter your extension (example: 100), followed bye the “Password” and enter the password of your extension.
In the “Transport type” choose UDP and “Port” setting to “5060”
Now go back to "Connection" and then to "Internet tel. settings"
Create a new profile and call it “Remote 3CX” and under “SIP profiles” choose the “3CX” profile.
Guide br Frederik Frydendal 8)
