Solved Custom config file doesn't respect "SP1"

[engin411]

3cx latest version with Yealink T46G phones, latest firmware. I'm editing the default Yealink template to include some features we use, specifically shared park. Below is my values/etc for this, and while the buttons show on the phone, the shared parks show as unregistered and they don't work. Pressing a shared park button during a call does nothing.

Ideas? Here's what I'm using in the custom template:
linekey.6.line = 0
linekey.6.value = SP1
linekey.6.pickup_value =
linekey.6.type = 10
linekey.6.label = Park 11
linekey.6.extension =

 

[craigreilly]

I thought the lines were now not ZERO based.
Perhaps try that..

Here is mine:

linekey.14.type = 10
linekey.14.value = SP3
linekey.14.line = 1
linekey.14.label = SP 3
linekey.14.xml_phonebook = 0

 

[CentrexJ]

Yes line must be 1 not 0.

The best way when in doubt is to have 3CX create a provisioning file for an extension with some Shared Parks and then look at the file that is created (you will have to browse in v15 as the files don't go in the provisioning folder).

 

[engin411]

That was it, shared parks are working now, thanks guys!