- Joined
- Apr 23, 2007
- Messages
- 23
- Reaction score
- 0
Is there a way to not process any in band dtmf? It seems as though I am getting these inbound and outbound and if after a call resolves and I hit a key it will show RTP and turn off in band dtmf (in the sever event log). This is a holdover issue from a previous post here about periodic beeping.
The beeps are all listed in the server event log (both inbound and outbound) and are shown below for diag purposes.
14:16:27.950 MediaServerReporting:
TMFhandler from 'dylanpbx:0/MediaServer'
TMF (in-band) from 207.174.202.4:10220 detected.
14:15:26.512 MediaServerReporting:
TMFhandler from 'dylanpbx:0/MediaServer'
TMF (in-band) from 192.168.1.6:16466 detected.
14:15:26.419 MediaServerReporting:
TMFhandler from 'dylanpbx:0/MediaServer'
TMF (in-band) from 192.168.1.6:16466 detected.
14:15:21.528 CallLegImpl:
nConnected Call(C:11): Created audio channel for Ln:1200@Teliax (207.174.202.4:10220) with Media Server (71.251.126.83:9024)
14:15:21.512 StratInOut:
nConnected Call(C:11): Setup completed for call from Ext.301 to Ln:1200@Teliax
14:15:21.512 CallLegImpl:
nConnected Call(C:11): Created audio channel for Ext.301 (192.168.1.6:16466) with Media Server (192.168.1.2:7032)
If I hit a key sending DTMF via RTP this is what occurs:
15:46:56.434 MediaServerReporting:
TMFhandler from 'dylanpbx:0/MediaServer'
TMF (RTP) from 192.168.1.6:16480 arrived. in-band DTMF tone detection is turned off.
where 192.168.1.6 is a linksys 942 and 192.168.1.2 is the pbx server on win2k3R2
advice?
The beeps are all listed in the server event log (both inbound and outbound) and are shown below for diag purposes.
14:16:27.950 MediaServerReporting:
14:15:26.512 MediaServerReporting:
14:15:26.419 MediaServerReporting:
14:15:21.528 CallLegImpl:
14:15:21.512 StratInOut:
14:15:21.512 CallLegImpl:
If I hit a key sending DTMF via RTP this is what occurs:
15:46:56.434 MediaServerReporting:
where 192.168.1.6 is a linksys 942 and 192.168.1.2 is the pbx server on win2k3R2
advice?