Hi guys,
We've been trying to get something up and running within 3CX without any luck.
Basically this is the result we'd like to become:
* Caller calls the DID
* The call should be transferred to the first technician's mobile phone number. However, we don't want the caller to be transferred to his mobile phone's voice mail in any case (even when it's powered off and the voicemail answers immediately)
* On no reply after 15 seconds, the second technician's mobile phone number should be called.
* At last, the third one's mobile phone number should be called (and if possible, just start with the first one again if still nobody answered the call)
We know about the Rebound feature, however you can't use this one for an "external caller" in the queue.
That's why we tried to do this:
* Set up a queue which will ring the first extension
* That first extension has an "exception" forwarding rule forwarding all calls from any caller ID to his mobile phone number with the rebound feature
* That first extension also has a forwarding rule on "no answer after 15 seconds" to call the second technician's extension with a similar setup
Problem now is:
* I have the impression that a queue/ring group ignores any forwarding rules
* So we tried to immediately let the call arrive in extension 101 (without any queue or ring group), then indeed the exception forwarding rule is fired and his mobile phone rings, he does get the rebound question, but when he decides to NOT accept the call, the no-reply rule is no longer fired (I suppose because 3CX sees the transferral towards the mobile phone number as a "successful" answer)
We're out of options now - does anybody have any idea?
(The only solution I still see is to work with the VAD, but from there you can't create any new calls, just transfer too, so that leaves me with the same problems if I'm not mistaking since VAD only supports a 'blind' transfer, leaving us with configuring all the forward rules on the 3CX extensions again)
Thanks in advance!
We've been trying to get something up and running within 3CX without any luck.
Basically this is the result we'd like to become:
* Caller calls the DID
* The call should be transferred to the first technician's mobile phone number. However, we don't want the caller to be transferred to his mobile phone's voice mail in any case (even when it's powered off and the voicemail answers immediately)
* On no reply after 15 seconds, the second technician's mobile phone number should be called.
* At last, the third one's mobile phone number should be called (and if possible, just start with the first one again if still nobody answered the call)
We know about the Rebound feature, however you can't use this one for an "external caller" in the queue.
That's why we tried to do this:
* Set up a queue which will ring the first extension
* That first extension has an "exception" forwarding rule forwarding all calls from any caller ID to his mobile phone number with the rebound feature
* That first extension also has a forwarding rule on "no answer after 15 seconds" to call the second technician's extension with a similar setup
Problem now is:
* I have the impression that a queue/ring group ignores any forwarding rules
* So we tried to immediately let the call arrive in extension 101 (without any queue or ring group), then indeed the exception forwarding rule is fired and his mobile phone rings, he does get the rebound question, but when he decides to NOT accept the call, the no-reply rule is no longer fired (I suppose because 3CX sees the transferral towards the mobile phone number as a "successful" answer)
We're out of options now - does anybody have any idea?
(The only solution I still see is to work with the VAD, but from there you can't create any new calls, just transfer too, so that leaves me with the same problems if I'm not mistaking since VAD only supports a 'blind' transfer, leaving us with configuring all the forward rules on the 3CX extensions again)
Thanks in advance!
