FXS/FXO port and phones

[Eliminateur]

Hello,
i have some Micronet SIP FXS+FXO gateways and i wanted
to know if 3cx product can handle a hybrid architecture with internal IP
phones on one side and POTS phones connected to the FXS ports of the gateway(i.e: if the software can handle comms between POTS-IP phones and from POTS-gateway-PSTN comms).

Can it also handle a complete POTS solution in which no-ip phones are
present and a FXS gateway acting as bridge(POTS-PBX replacement/migration
scenario which several customers present when changing to voip / ATA adapters).

thanks in advance

 

[jb]

Yes, should be no problem.

Here's the 3CX config guide for some Micronet gateways.

http://www.3cx.com/voip-gateways/Micronet-SP5050.html

As far as 3CX is concerned the FXS phones are the same as any other IP phone extension - provided the Micronet is setup properly.