GSM gateway settings for uplink

[Pete-TPP]

I have the Gempro GSM gateway attached to the phonesystem. Since the update to 3cx 7.1 the uplink to: 79@10008 (receptionist@linenumber) does not work anymore. Anyone any suggestions?

 

[bluetel2]

hello,

ok ut can you send the log file and little description of your network, do you have converter ? etc... because like this ... :roll: it's complicated.

 

[Pete-TPP]

Sorry for late response but I did not recieve an ermail with your update. Settings are:

Gempro with Sim (status registered) is connected via lan to 3cx. Outbound calls are no problem. Inbound calls seem to have wrong uplink settings wich used to work with old 3cx. I tried as uplinkname:
receptionist: 91
receptionist@3cxserver: [email protected] (this one used to work fine, but now phone rings once or twice and then disconnected)
pstnline@3cxserver: [email protected]
Nothing at all
*
And other settings

The device does recieve tha calls in that log but does not send them trough

Systemlog(tell me if you need more)
10:13:16.889 [CM102001]: Authentication failed for SipReq: INVITE [email protected] tid=902fc0da76 cseq=INVITE [email protected]:5060 / 2 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings

10:13:16.889 [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:

INVITE sip:[email protected] SIP/2.0

Via: SIP/2.0/UDP 192.168.4.5:5060;rport=5060;branch=z9hG4bK902fc0da76

Max-Forwards: 70

Contact: <sip:[email protected]:5060>

To: <sip:[email protected]>

From: "+31621201449"<sip:[email protected]>;tag=56997f08

Call-ID: [email protected]

CSeq: 2 INVITE

Allow: INVITE, CANCEL, ACK, BYE, NOTIFY, REFER, OPTIONS, INFO, MESSAGE

Proxy-Authorization: Digest username="10008",realm="3CXPhoneSystem",nonce="414d535c005bab9c91:de7ed6d9bd823b0f3f0c2208abe4ea9c",response="73495437be934093a9388c69bf3680be",uri="sip:[email protected]",algorithm=MD5

Supported: replaces

User-Agent: CM5K-TA1S (803060)

Allow-Events: talk, hold, conference

Content-Length: 0

 

[discovery1]

Systemlog(tell me if you need more)
10:13:16.889 [CM102001]: Authentication failed for SipReq: INVITE [email protected] tid=902fc0da76 cseq=INVITE [email protected]:5060 / 2 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings

Problem is fairly straight forward from the logs

 

[Pete-TPP]

Well that is what I thought. Could you tell me what woul be the solution according to you? Because the GSM Gateway device IS registered. I can place calls but not recieve them. The uplink sends them to a receptionist but it seems to give a problem. I would not know where to register else. How could I make outgoing calls if the passwords would not match? It worked before and did not change this. The status also indicates registered. The receptionis I also use for two other lines and there it works. I refilled the password and username in the Gempro but still....
\Do you have any other options?

 

[omnideas]

Sometimes few of SIP server only accept SIP account as caller ID. so you may need to enter the system setting and set the CLID field the same with your SIP account in uplinK.


TIM