- Joined
- Jul 22, 2016
- Messages
- 5
- Reaction score
- 0
DISCLAIMER - this is my FIRST SMS Setup.
- I have Flowroute setup messaging enabled, and the SIP Truck in the 3cx config (PRO version on premise) with the Access and Secret Keys.
- I have a Ring Group setup with a DID and the DID is in a 7 digit format. Ring group is 8012. Specifically the DID under the SIP trunk is configured as *7digit#
- If I change the DID under the SIP Trunk to +110digit number i can initiate a SMS Message from one of the extensions in the Ring Group.
- When i change that DID to the +110digit number it blows up the inbound calls (flowroute default message cannot be completed as dialed)
- I cannot get inbound SMS to work and have looked everywhere for where to route the inbound SMS back to this ONE extension in the Ring Group.
