Installing 3CX SBC on Raspberry Pi 5 Guide - V6 Fail

[DSM_ChrisB]

Fails to work on IPV6 unless you tell WGET to only use IPV4.

https://www.3cx.com/docs/installing-pbx-raspberry-pi/

sudo bash -c "$(wget -qO- --inet4-only http://downloads-global.3cx.com/downloads/sbc/3cxsbc.zip)"


Please fix, its annoying.

 

[KyriacosS_3CX]

Hi @DSM_ChrisB ,

We tried on an IPV6 enabled pi, and for us it worked without the need to force ipv4. Could you share some screenshots of the error you are getting, and the IP config (including routes and DNS config) of your pi, so we can check for differences?

Please anonymise any public IPs etc.

Best,
KS.