Lost intercom (*9) after V15 upgrade

[patrickrivard]

We use to be able to intercom by dialing *9 in front of the extension number. But after upgrade to V15, it no longer works.
The extensions are set up to have the right to Intercom.
And the Dial Code for Intercom is set to *9.

Anybody else have this issue?
How to solve it?

 

[Vali_3CX]

Hi Patrick
The extension you're calling, it is registered?
I tried to reproduce the issue and the only case was when callee wasn't registered ("Call failed, unavailable").
You tried to intercom the same extension from a different client than 3CXPhone for Windows?

 

[patrickrivard]

Vali,

All extensions are registered.
From or To any ext, or client, *9 no longer works.
I should have been clearer as to what happens when you dial *9xxxx (xxxx = ext number).
What we get is that the contacted ext will ring as a normal call to that ext, instead of the usual direct link Intercom.
It's just like the *9 is ignored in the dial process...

Thank you

 

[tratz]

If all of the extensions are enabled for intercom, double check that the phones themselves are allowing intercom. It should show that way within the 3cx log files.

 

[patrickrivard]

I have 7 ext that I can intercom to (*9) (like it use to on V14) and 7 other ext that it does not work...
(and it use to work before the upgrade to V15)
I have attached 2 log files for one of each.
Please let me know what you think might be the problem...

 

[briankayser]

tratz,
You PM'd me about a conference calling trick but my PM here on this forum does not seem to work, they just sit in the outbox and that seems to be pretty common with a lot of people.
Please email at [email protected]. I've got something simple you can try and I'm curious if it works on v15.

 

[patrickrivard]

What...

Intercom... Not Conference call...