Master/Slave bridge problem after update

[emtexcc]

Hi all,

I have problem with master/slave bridge. After upgrade to v18 (both VM's) the bridge is offline and that 2 instances can't communicate more internal.

Port 5090 is open on both VM's and its correct password on slave. All was working before the upgrade.


Best regards,

 

[emtexcc]

Hi,

after replacing IP's with FQDN the bridges are up. Is that a bug or?

 

[Alphabetic]

Hi,

after replacing IP's with FQDN the bridges are up. Is that a bug or?

I think this is a bug as I've encountered the same. If you change it back to FQDN you'll probably find it works.

 

[YiannisH_3CX]

Are the systems local to each other or are you using their public IP to connect? Can you resolve their IPs from each machine?

 

[emtexcc]

Hi @YiannisH_3CX,

my are not local. They are using public IP to connect. Yes I can resolve it and ports are open. It was working before the update normal but after it is not working with IP direct just FQDN.

 

[YiannisH_3CX]

Just tried your scenario now and it worked for me. Are you using the same version of PBX to both installations?
Did you try at any point to restart your SIP server service?