Mediant 2000 with 3CX

[Keemat]

Hi,

Please suggest is the Mediant 2000 will work with 3cx ..

[CM010001] Line configuration does not allow identification of the source of this call. Check Advanced Options for Gateways and Providers and match a field to a correct value from the following: Contact IP: 192.168.0.80 From: '1902'; To: '3700'; Rline: '3700'; Contact: '1902'


Please suggest....

Thanks
Keemat

 

[SY]

Hi,

Please suggest is the Mediant 2000 will work with 3cx ..

[CM010001] Line configuration does not allow identification of the source of this call. Check Advanced Options for Gateways and Providers and match a field to a correct value from the following: Contact IP: 192.168.0.80 From: '1902'; To: '3700'; Rline: '3700'; Contact: '1902'


Please suggest....

Thanks
Keemat

What is 3700 and what is 1902 in your phone configuration?

 

[Keemat]

Hi,

Mediant 2000 Config

T1 ISDN Configuration


Trunk ID Channels Phone Number

4 24 1900


3CX

SIP Extension No : 3700




Logs from Mediant 2000


9d:14h:25m:57s ( lgr_stk_ses)(2834 ) ACK sip:[email protected];user=phone SIP/2.0 Via: SIP/2.0/UDP 192.168.0.80;branch=z9hG4bKacwAKQEdc From: <sip:[email protected]>;tag=1c3593 To: <sip:[email protected]>;tag=4c2d6c05 Call-ID: [email protected] CSeq: 7543812 ACK Max-Forwards: 70 User-Agent: Audiocodes-Sip-Gateway-Mediant 2000/v.4.20.354.559 Content-Length: 0

9d:14h:25m:57s ( lgr_stk_mngr)(2835 ) DeleteSuspendEntryBusyTable-callid: [email protected] BusyEntry-ID: 0 Index: 0

9d:14h:25m:57s ( lgr_flow)(2836 ) | | #0:RELEASE[email protected])

9d:14h:25m:57s ( lgr_aaa_mngr)(2837 ) |CALL_END |98 |0 |4 |3 |255 |1 |ISDN |TEL |192.168.0.80 |0.0.0.0 |0 |0 |1902 |2 |1 |3700 |3700 |0 |N/A |20 |0.0.0.0 |0 |IP |GWAPP_UNASSIGNED_NUMBER |0 |0 |0 |0 |90162227822278vkwe


Thanks

Keemat

 

[SY]

Why 1902 is coming to 3CX? What rule is applied by your device to form this value?

Sorry, I didn't use this device

 

[5qg4]

Please seek help to your gateway's reseller, it may be better than seek for help over here.

Good Luck .....

 

[miraportuga]

If i understood well, thats a gateway. Go to your gateway configuration under "Manage gateways and Providers" click on that gateway and on the configurations go to the last tab and enable "User Ip in contacts to recognize source# and below input the gateway IP. It worked here for me, it might work for you too.
Good Luck