NIC Binding SBS 2003

[lav180]

Hi,

I've just installed 3CX for the first time. When the installation went through 3CX reported that it had bound itself to the public IP address on the second NIC, I wanted to use the Internal interface and then route everything through ISA 2004. I can't see anywhere where 3CX will report what NIC's it is using. I have a Snom M3 the base station is on the private LAN when I look at identity 1 the "Server is Local" box is blank. All help appreciated. Apologies if the questions have been answered already, please point me to relevent section.
Cheers,
Pete

 

[lav180]

Thought the issue could be that as there were 2 NICS present at install it detected both and bound itself to the public interface. So I uninstalled 3CX disabled public NIC and reinstalled. Checked the system log and th eonly IP present was the loacl LAN, great this is what I want. Re-enabled the Public NIC checked the Server Log and it had auto discovered the second interface and added it!. When I then ran the firewall test it returns Error(13) "The machine is on a public IP. Please check the FAQ for more information." There is no FAQ that I can find for this error. Could someone from 3CX please respond to this?