Nokia E65 incomming promblem

[vijaykumar]

Hi Guys

I used the settings you offered here for E65, I got the profile registered at last, but my main problem is that i can call out ! but i cannot recieve calls. Any settings i should do in server or on phone. Can any body help me with this.

Thanks in advance

Vijay

 

[5qg4]

Please post your console log.

 

[vijaykumar]

Hi

This is my Server Log, it is landing to my voice mail.

15:18:44.643 CallLegImpl:nConnected Call(C:7F): Created audio channel for Ext.103 (10.0.3.98:1372) with Media Server (10.0.3.253:7324)
15:18:29.486 CallConf:nIncoming Call(C:7F): Incoming call from Ext.103 to sip:[email protected]

 

[vijaykumar]

Help me please with my E65

Hi Guys,

Please help guys..... I am completly blank any settings to be changed.

 

[5qg4]

Hi vijaykumar,

Please provide more details log here maybe help to solved your problem faster.

Have you done the line configure for inbound call to your E65's extension?

The option at Lines > Manage> Click the number at Identification column
Route inbound calls in office hours to : your E65's extension
Route inbound calls out of office hours to : your E65's extension

Other Options:
Answer incoming calls on this line: ticked
Answer after (seconds): 1
Maximum simultaneous calls: 1

You maybe check your E65's setting by reference this post
http://www.3cx.com/forums/viewtopic.php?t=1488

Hope this can help to solved your issue. :!:

 

[vijaykumar]

Hi,

I am sorry i did not get this line,

"The option at Lines > Manage> Click the number at Identification column
Route inbound calls in office hours to : your E65's extension
Route inbound calls out of office hours to : your E65's extension "

If i configure tha same Ext on my Xlite i can get incomming but on my E65 i am not able to get it even from other local extension.

I used the same configaration which is posted on this form, after that only i was able to register the line with the server. that was very help full for me.

 

[C51]

what software are you using on your device?

what software are you using on your device?

thanks

Jordan