Octopus > BeroNet GW > 3CX = Call drop

[bujo]

We have configured a internal S0 on our octopus to redirect calls to the 3cx... but if we call a msn wich is redirected the call drops after 5 sec.

The call come from 68 and goes to 29

Here are the beronet log:

CDR,4,ISDN:1:2,SIP,68,29,"68" ,,17/01/05-11:16:11,17/01/05-11:16:15,17/01/05-11:16:15,17/01/05-11:16:15,ISDN,EVENT_CLEANUP:16,-,-
S BYE|REQUEST: from="68" [email protected], to= "" [email protected]
I CONNECT|REQUEST: port=1, channel=2, dad=29, oad=68
S OK|INDICATION: from="68" [email protected], to= "" [email protected]
S PROXY_AUTHENTICATION_REQUIRED|INDICATION: from="68" [email protected], to= "" [email protected]
S INVITE|REQUEST: from="68" [email protected], to= "" [email protected]
D INCOMING iport:1, channel: 2 src:68 dest:29 -- OUTGOING src:"68" dest:
I SETUP|INDICATION: port=1, channel=2, dad=29, oad=68
CDR,3,ISDN:1:2,SIP,68,29,"68" ,,17/01/05-11:16:07,17/01/05-11:16:11,17/01/05-11:16:10,17/01/05-11:16:11,ISDN,EVENT_CLEANUP:16,-,-
S BYE|REQUEST: from="68" [email protected], to= "" [email protected]
I CONNECT|REQUEST: port=1, channel=2, dad=29, oad=68
S OK|INDICATION: from="68" [email protected], to= "" [email protected]
S PROXY_AUTHENTICATION_REQUIRED|INDICATION: from="68" [email protected], to= "" [email protected]
S INVITE|REQUEST: from="68" [email protected], to= "" [email protected]
D INCOMING iport:1, channel: 2 src:68 dest:29 -- OUTGOING src:"68" dest:
I SETUP|INDICATION: port=1, channel=2, dad=29, oad=68

Here the 3CX log:

3CXQueueManager ID: 105
Lost Call in Queue Warteschleife (800) from Caller ID '68' Queue: 800 [Warteschleife] caller: 68

Call Log:

01/05/2017 11:54:21 AM 68 Q Warteschleife (800) Not Answered


Any ideas?