Overhead speaker paging needed

[phonesconnect]

I have a new install of v18 hosted by 3CX and all phones on the LAN are behind a raspeberry pi sbc. I need to connect into an older overhead paging system from the current analog system to a couple speakers for paging accounements. I read about a snom PA1 for something like this, but also saw it was end of life and is not on the phone list to add in the hosted instance. Can a snom pa1 still be used like this on a hosted system, or what is compatible that I could use.

 

[Charles_3CX]

You can check the Fanvil PA2 or PA3 for the same purposes and are supported remotely via SBC to connect to a 3cx hosted instance:https://www.3cx.com/sip-phones/fanvil-sip-doorphones/

 

[CentrexJ]

I have a new install of v18 hosted by 3CX and all phones on the LAN are behind a raspeberry pi sbc. I need to connect into an older overhead paging system from the current analog system to a couple speakers for paging accounements. I read about a snom PA1 for something like this, but also saw it was end of life and is not on the phone list to add in the hosted instance. Can a snom pa1 still be used like this on a hosted system, or what is compatible that I could use.

Fanvil PA2/PA3 are supported https://www.3cx.com/sip-phones/fanvil-sip-doorphones/

 

[phonesconnect]

You can check the Fanvil PA2 or PA3 for the same purposes and are supported remotely via SBC to connect to a 3cx hosted instance:https://www.3cx.com/sip-phones/fanvil-sip-doorphones/

Thank you for the quick reply. I will take a look at those