Phone provisioning issue

[Alphabetic]

V18 U8 B939

Good morning,

I've got a few Yealink T53 phones on 96.86.0.76.

I've got 2 of those acting as SBCs.

When I provision the EXT and reset the phone they're not setting up.

Event log shows:




What does this mean?

On another note, when I set up extensions and it fires off to RPS server, and they appear in bold in the phones tab do I still need to "assign" or will it sort itself out nowadays?

 

[Alejandro_3CX]

On another note, when I set up extensions and it fires off to RPS server, and they appear in bold in the phones tab do I still need to "assign" or will it sort itself out nowadays?

PnP provisioining is when you plug the phone, it sends the multicast, select the phone and assign an user. RPS is when you add first the phone to a user extension, then you plug the phone in the network and it will take the provisioning URL from the RPS.

Regarding the phone, please delete the device from the user extension and save the changes, perform a factory reset as mentioned here. Then proceed to configure following this guide.