Toggle sidebar Toggle sidebar

Solved Raspberry Pi 3 SBC wont work after reboot

Status
Not open for further replies.
OCWI

OCWI

Platinum Partner
Advanced Certified
Joined
Jan 17, 2017
Messages
166
Reaction score
57
Hello,

I am trying to put raspberry pi 3's in the field as SBC's / border session controllers and things work when install the sbc right away, but then after rebooting it stops working!!!!

I know little to nothing about linux, which im sure doesnt help...
 
Hello @OCWI

This could be because after a restart the SBC service does not start as the network is not ready. Try setting the network boot at delayed start and see if that solves your issue.
To do so log into the terminal and type
sudo raspi-config

select: Wait for network at boot and then: Slow wait for network connection before completing boot

click ok and finish and restart the Raspberry Pi
sudo shutdown -r now
 
  • Like
Reactions: OCWI
Hey @YiannisH_3CX

Thanks very much for this tip, I've just had the same problem and this solved it! So easy!
 
THIS WORKED!!! THANK YOU SO MUCH!
 
Wait wait wait a minute! Okay, so we've had some great success to get this to work...initially. However, if you were to unplug the network cable, reboot the switch, reboot the router, or make any other network change, then it just doesn't work. The phones become unreachable and then are unable to connect to the SBC again. I believe that it's got something to do with the SBC not restarting the 3CX service again, because the only way to fix it is to reboot the SBC. But I can't have this as a normal part of troubleshooting as I have located the router, switches, SBC in a network cabinet that is very difficult to get into as it has about 15 devices in it, so instructing the customer to "just unplug and replug the Raspberry Pi" would require them to know what they were doing, and this customer has a hard time using the phone, let alone identifying network equipment. Please help!
 
  • Like
Reactions: myuniquename
bump
 
Thanks that has worked for me too! ;)
 
Can someone please help? This customer had a power outage yesterday and I am guessing that the router or switch took longer to boot than the raspberry pi, and thus I had to go through a lengthy process over the phone of talking the customer through identifying, unplugging then replugging the raspberry pi. Not good.

Please help!
 
I think the best course of action here is to have 3cx further refine the BSC software.

In the meantime we started putting the rasp pi's on dataplicity so we can access the terminal and more importantly do a remote reboot.

There are a few solutions along these lines, looked at VNC and another remote control item before settling on dataplicity. I like dataplicity because myself and all my techs can control the pi's easily from our cell phones and see when they are up/down.

They however arent very cheap, at $2/mo/pi. Not impressed with that but not many options out there.

On this note, is there any intention from 3cx to further refine the BSC software? I love how often the PBX software is updated and the new features always being introduced, but in the time we have resold them (about a year now) we never really saw any sort of real updates for the BSC software linux or otherwise.
 
Hey @OCWI

This is genius! I'll check that out.

Agreed, 3CX needs to look into this fundamental flaw. Anyone else had this problem?
 
Actually on second thought that statement wasn't totally fair to 3cx. We have seen some rather significant SBC improvement over the last year particularly with regard to the raspberry pi. I hope it continues in that direction and maybe even a little more focus on it!

It would be really nice to have some sort of tunnel uptime monitoring, or even a tunnel up/down status in the PBX!
 
how do we remove the "solved" from this thread?
 
I think an admin has to do that...
 
bump! Someone please help!
 
Anyone?
 
If you want something implemented regarding the SBC functionality or software then you should create a feature request in the ideas section of the forum where users can upvote these ideas and then the appropriate departments can review them.
 
@YiannisH_3CX

Wait wait wait a minute! Okay, so we've had some great success to get this to work...initially. However, if you were to unplug the network cable, reboot the switch, reboot the router, or make any other network change, then it just doesn't work. The phones become unreachable and then are unable to connect to the SBC again. I believe that it's got something to do with the SBC not restarting the 3CX service again, because the only way to fix it is to reboot the SBC. But I can't have this as a normal part of troubleshooting as I have located the router, switches, SBC in a network cabinet that is very difficult to get into as it has about 15 devices in it, so instructing the customer to "just unplug and replug the Raspberry Pi" would require them to know what they were doing, and this customer has a hard time using the phone, let aloneidentifying network equipment. Please help!

Can someone please help? This customer had a power outage yesterday and I am guessing that the router or switch took longer to boot than the raspberry pi, and thus I had to go through a lengthy process over the phone of talking the customer through identifying, unplugging then replugging the raspberry pi. Not good.

Please help!
 
  • Like
Reactions: reterex
  • Like
Reactions: Peter Richardson
Status
Not open for further replies.

Latest Posts

Forum statistics

Threads
112,063
Messages
590,563
Members
165,013
Latest member
aziz.doukali-daief@bechtl
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom