SBC Controller on Raspberry Pi

[millennium2]

Hi,

We have a SBC Controller on Raspberry Pi and two phones connected to it. Too many times (and no matter how many times we tell them not to), staff have been power spiking the Pi Box, either taking the power cord out, or turning the power strip off/on. And when the Pi Box is powered back on and booted up, the 3CX service fails to restart, thus the phones are still down. We so far have to log into it remotely, and then restart the 3CX SBC service restart manually...but is there a way to set the Pi box to restart the 3CX SBC service automatically upon boot up or in the event of a failure?

 

[leejor]

Does this help?
https://www.3cx.com/community/threads/raspberry-pi-3-sbc-wont-work-after-reboot.47021/

You may want to consider the purchase of a small UPS unit, just for the Pi. Put them both somewhere that is difficult to get to. Since it runs on 5 volts (4 X 1.25 MiMH batteries), there may also be a smaller, rechargeable battery backup unit available.

 

[N_G]

Are you running v15?