Sipgate Trunk, incomign calls doesn´t work!

[Saschavi]

Hey together,

Im absolutly Newbie in 3CX.

Many threads helping me in the German Board.


But now i have a Problem:

Im finish with outgoing Connections,but when iam Call the Number from SIPGATE ( My Number).
It is occupied.


Iam using Windows7 , because before i took it on a Windows Server i want to test it.


Logfile:

18:09:56.442  [CM302001]: Authorization system can not identify source of: SipReq:  INVITE [email protected]:1024 tid=24fb.bb6a2b61.0 cseq=INVITE [email protected] / 103 from(wire)
18:09:45.226  [CM504004]: Registration succeeded for: 10000@colorhost
18:09:44.927  [CM504003]: Sent registration request for 10000@colorhost
18:09:40.463  [CM504004]: Registration succeeded for: 10000@colorhost
18:09:40.182  [CM504003]: Sent registration request for 10000@colorhost
18:09:33.619  [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
  INVITE sip:[email protected]:1024;rinstance=907d704c19f5b76e SIP/2.0
  Via: SIP/2.0/UDP 217.10.68.150:5060;branch=z9hG4bK005f.c949a823.0
  Via: SIP/2.0/UDP 172.20.40.6;branch=z9hG4bK005f.c949a823.0
  Via: SIP/2.0/UDP 217.10.68.150:5060;received=217.10.68.178;branch=z9hG4bK3716aefc
  Via: SIP/2.0/UDP 217.116.117.70:5060;received=217.116.117.70;branch=z9hG4bK3716aefc;rport=5060
  Max-Forwards: 67
  Record-Route: <sip:217.10.68.150;lr=on;ftag=as69448a61>
  Record-Route: <sip:172.20.40.6;lr=on>
  Record-Route: <sip:217.10.68.150;lr=on;ftag=as69448a61>
  Contact: <sip:[email protected]>
  To: <sip:[email protected]>
  From: "anonymous"<sip:[email protected]>;tag=as69448a61
  Call-ID: [email protected]
  CSeq: 103 INVITE
  Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
  Supported: replaces
  Content-Length: 0
  X-LEGID: 47694dc4

Hope u can help me


Regards
Sascha

 

[RichardCrabb1]

For Sipgate I just use in settings server or hostname= sipgate.co.uk Leave outbound proxy blank. This means that you need to tell it the WAN IP address on the advanced TAB. You could use STUN, but I find static IP much more stable. Obviously you need a static IP from your ISP.

I hope that helps
Kind regards
Richard