Skype2sip or stonevoice

[knops]

Hi,
I have installed 3cx and it work perfectly!!!!

But I have somes questions.
I see on the forum :
http://www.3cx.com/forums/viewtopic.php?t=1948&highlight=skype2sip
http://www.3cx.com/forums/viewtopic.php?t=216&highlight=skype
And other.

I want to do SkypeOut call through 3cx, with un special first number ( 8 ) to indicate that this call must be do with skype.

My phone number is : (exemple) 0041223334455 And if I do the number : 80041223334455 this call (to : 0041223334455) must be call by skype.
(sorry for my explanation and my English ).


My server ip is : 10.5.5.2

I have install Uplink skype2sip

I have add an PSTN line with the number 5050
gateway : 10.5.5.2
Virtual extension : 5050
Authentication ID : 5050
pass : 123

at the End the wizard ad a Outbound Rules "rule for ..." Number prefix "8" , transform mask "r".

Then, in uplink skype2sip, I add the sip configuration :
user : 5050
Pass : 123
domaine : 10.5.5.2

skype2sip can connect, and is in green in the line status.

In the line status I have my other extension, ex: 5061 (connected and work with Xlite.)


Now , if a do a call with : 8xxxxx or 80041223334455
Xlite say : call unavailable and write : Forbidden.
If I call : 5050 -> temporarily Unvailable



Logs in serversatus:
1er test 80041xxxx
11:44:46.640 CallConf::Rejected [CM103005] Call(13) is rejected: Invalid password provided
11:44:46.640 StratInOut:nCancel [CM104008] Call(13): Call from Ext.5061 to 0041223334455 terminated; cause: 403 Invalid password provided; from IP:10.5.5.2
11:44:46.546 AuthMgr:nAuthFailure [CM101000] Registration request from sip:[email protected]:5060 failed. Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings
11:44:46.546 AuthMgr::requestCredential [CM001005] Message SipReq: INVITE [email protected]:5060 tid=a6227263c3678c2d cseq=INVITE [email protected]:5060 / 2 from(wire) failed authentication!
11:44:46.546 AuthMgr::requestCredential [CM001001] Authentication ID for CfgExt:5061 doesn't match provided: 5050 vs 5061

second : 5050 :

11:42:14.890 CallConf:nIncoming [CM003002] Call(12): Destination not available for call from sip:[email protected] to sip:[email protected]
11:42:14.890 StratInOut::initialize [CM004003] Call(12): Can't call external line DN


Any Idee?

An other solution to do call with skype?

Thanks

Knops

 

[SY]

11:44:46.546 AuthMgr:nAuthFailure [CM101000] Registration request from sip:[email protected]:5060 failed. Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings
11:44:46.546 AuthMgr::requestCredential [CM001005] Message SipReq: INVITE [email protected]:5060 tid=a6227263c3678c2d cseq=INVITE [email protected]:5060 / 2 from(wire) failed authentication!
11:44:46.546 AuthMgr::requestCredential [CM001001] Authentication ID for CfgExt:5061 doesn't match provided: 5050 vs 5061

Account is not properly configured on X-lite. It uses UserID 5050 instead of 5061 specified in PBX configuration.

 

[knops]

If i do somes call from 2pc with X-lite, there are no problem.

ex : pc1 (5061)
pc2 (5062)

I can do a call

 

[knops]

In line manager, "manage gateway & provider" y have my line, "SkypeOutUplink
type : PSTN.
In "Registration settings"

I have Check, the checkbock :
Use registration's 'Contact' field host/port instead host/port specified in configuratio

and in "Require (optionally: authorized) registration for:"

I have checked "Require (optionally: authorized) registration for:"

Now I don't have the problme of authetication. but

I have that in my logs :
14:01:36.234 StratInOut:nHangUp [CM104007] Call(32): Call from Ext.5061 to 0041223334455 has been terminated by Ext.5061; cause: CANCEL; from IP:10.5.5.2
14:01:24.265 CallConf:nIncoming [CM103002] Call(32): Incoming call from 5061 (Ext.5061) to sip:[email protected]

Nothing passed

Any Idee?

Thanks

Knops

 

[knops]

the problem was in the network configuration of uplink skype2sip.

in setting -> network

i must desabled the checkbox :
"use uPNP to find..."
and
"usr STUN servers to find..."


Now it work.

Hihi

Bye

Knops

 

[N_G]

How much does the software cost from stonevoice may i ask? How many lines does it support? Just for our reference

 

[knops]

Sorry, i don't Know because I can't use the trial version,
and uplink skype2sip work correctly now

sorry

 

[Mirzab]

Hi Nick,

NCH Software is currently selling Uplink Skype2SIP for US$27.50 though in the past I believe the claim on their site of a price of US$55 to be true. I did purchase this myself and got it working OK fairly easily, but I would not call it plug and play :lol:

No real use for it though, I wasted my money. To use Skype via Uplink you must key "00" before any number, no problem with configuring rules to add it, but also blocks having any traditional USA/Canada VoIP provider as a backup in the same rule. Also, maybe just me, but I feel call quality is poor compared even to cheaper VoIP providers.

Mirza.